Ing Gerold Fiechtl
Comentado en Alemania el 3 de mayo de 2025
sehr gut, paßt problemlos in meine Z8
ROSALIO VERA FRANCO
Comentado en México el 14 de abril de 2025
Excelente opción a las tarjetas CFexpress tipo B, con un SSD de 2TB te ahorras como el 80% del costo de una tarjeta original
長尾 昌紀
Comentado en Japón el 7 de abril de 2025
素晴らしい加工精度スピードは1800とか1200とか書いてありますが、SSDに依存GEN4なら3000は余裕で超えます!モンスターアダプターよりもすんなりカメラにも入ります
Alex
Comentado en Canadá el 19 de abril de 2025
The adapter worked right away with the Canon R5 Mark II camera and the Corsair MP600 Mini 2TB drive. I added some thermal paste between the drive and the adapter case for better thermal conductivity.
lukemaeda
Comentado en Japón el 30 de julio de 2024
ZITAY タイプBカードケース Panasonic S1H と記載されていたのでそのまま信じて購入してしまいました。SUNEAST 1TB NVMe SSD M.2 2230 PCIe Gen 4×4 最大読込: 5,000MB/s 最大書き:4,500MB/s Steam Deck Microsoft Surface 対応 SE900GEN423-1TこのSSDを組み込みましたが、Panasonic S1H SDカードスロットでした。動作確認も出来ずどうしたものかと一晩考えて思い浮かんだのはLumix S5M2 はUSB Type C で外付けSSDを使用出来るのでCFexpressカードリーダーを繋ぎフォマットと動画書き込み出来るか確認しました(安定性も含めて)。GH7実機CFexpressスロットにての装着(熱暴走)確認以外は全てOKでした。ケース自体は問題無いと思いますしネジで固定も出来ますので良いと思います。但し、記載項目は正確にしてもらいたいと思います。
Andy
Comentado en los Estados Unidos el 9 de junio de 2023
I decided to experiment a little with doing a DIY CFExpress card. The Zitay enclosure is a step above any of the other ones I've tried - from early MakerFab enclosures to Sintech enclosures; the first one looks like a science experiment, while the 2nd one was a little snug in my Z9.The Zitay, on the other hand, comes with pre-printed labels (only up to 1TB - c'mon Zitay, make 2TB labels too, please :) ), is precisely machined, has an indentation for the pre-printed labels so the card does not become too thick with the label on it, and teeny tiny little screws that fit perfectly. The kit comes with a screwdriver, thermal paste, and thermal pads.Together with an M.2 2230 NVMe, it's all of 5 minutes to assemble this, put it in your camera, and format it. Once done, it works perfectly.Your performance will vary depending on the SSD used. I have a Nikon Z9, Z8 and Z7. Slower PCIe 3.0 SSDs work beautifully in the Z7, but are unable to cope with the highest demands of the Z8 and Z9 (i.e., 4Kp60 N-RAW N-Log HIGH quality video) due to their too slow write speed.However, a PCIe 4.0 SSD such as the SABRENT Rocket NVMe series - available in sizes ranging from 128Gb to 2TB - works perfectly in all cameras, and allows you to record 4Kp60 N-RAW N-Log HIGH quality video. This, IMO, is a winning combination.Subsequent to my first purchase, I have bought 3 more enclosures, and have 2 x 512Gb cards, 1 x 1TB card and 1 x 2TB card, the latter 2 of which are the SABRENT.If you're a DIYer and understand that the bus architecture of CFExpress is essentially the same as that of an NVMe SSD, you'll know that the circuitry is simply a form factor adapter, and therefore highly reliable.This earns a very highly recommended rating from me.