No hay artículos en el carro
No hay artículos en el carro Medidor de horas mecánico de 8 a 80 voltios DC para barco, auto, ATV, UTV, motos de nieve, tractores de césped, generadores...
Descripción:
El medidor de hora de cuarzo está especialmente diseñado para la sincronización industrial estándar y proporcionar datos para la referencia de la duración de mantenimiento para equipos de precisión.
La unidad es ampliamente utilizada para rastrear las horas del motor y te permitirá realizar un seguimiento de las horas del motor para que puedas monitorear los intervalos de servicio.
Lectura: 99.999.9 horas
Precisión: 0.01 Cuarzo
Consumo de energía: 0,3 vatios
Diámetro exterior: 2.3 pulgadas.
Profundidad detrás del panel: 1.77 pulgadas (enchufe incluido)
Tamaño del agujero: 2 pulgadas.
Aplicaciones comunes: barcos, automóviles, motocicletas, ATV, UTV, Go Carros, Jet Ski, motos de nieve, tractores de césped, astilladoras de madera, trituradoras, bombas, generadores y muchos más.
David W.
Comentado en los Estados Unidos el 6 de enero de 2025
I installed this on an Eastwood QST 30/60 compressor to monitor hours for oil and filter changes. I wired it in so that it only counted time when the actual pump motor was running. Straight forward wiring and it was working. Unknown to me, when I checked this meter recently to see how many hours had been logged, it was at .7. So, I released the air in the tank and ran a full cycle to see if it would accumulate any time, it did not. Verified wiring, all was good. When you buy an hour meter, you expect it to work, but in parity with what other customers on here reported, it failed. Mine seemed to have failed sooner than most, but what is the point of an unreliable hour meter? I'm guessing it should have somewhere around 10 hours recorded at this point. I'd avoid this unit and anything that looks similar. Since it was dead, I did take it apart to see if anything showed signs of electrical failure inside, but nothing looked abnormal.
Customer
Comentado en Canadá el 9 de julio de 2024
I now know how many hours my oil furnace runs during the winter. Also allows for a calculation of oil used.
Hector Hampl
Comentado en México el 6 de mayo de 2024
Paquete entregado en tiempo y forma
ElectricianTech353
Comentado en los Estados Unidos el 29 de diciembre de 2024
Took some wiring to install which is fine for anyone who is handy or hands-on. I like that it's very solid, mechanically driven, and I don't need a battery to keep the runtime on the meter. I can count on the fact that I won't lose my runtime like from other gauges that have a battery and are most likely to fail in the winter and lose the runtime.
Alfie
Comentado en los Estados Unidos el 27 de diciembre de 2023
Purchased to install on my lawn tractor to keep better tabs on hours between oil changes. I wish it would have fit in my panel. It looks great but Would not fit in instrument panel area.
JB
Comentado en los Estados Unidos el 2 de diciembre de 2022
Easy to install on the old shop forklift and reads accurately. The only small concern was the mounting bracket is square but the dial is round. This made the installed instrument a little flimsy and less secure than I had expected. It works fine on this forklift since we seldom use it, but one may question the overall stability of the mount on something that would see more action (like a boat, car, etc.).
Productos recomendados
Mex $480.00
Mex $ 220 .00 Mex $220.00
Mex $379.00
Mex $ 197 .00 Mex $197.00
Mex $2,406.49
Mex $ 1,106 .00 Mex $1,106.00