No hay artículos en el carro
No hay artículos en el carroJulie Wicks
Comentado en Canadá el 19 de marzo de 2025
The detachable heat plate seemed like a really great idea to assist with cleaning it but it is made so thin it showed up bent.The popcorn maker made the popcorn really well, very few unpopped kernals, overall but with the plate arriving bent we ddecided to exchange it for a new one. Washed it first in the dishwasher and the top 'cap' piece became warped as well and would not go back on the dome again, just kept popping back off.We used to have an old one (not sure what the make was) that never had these issues, wish we still had it now :(
Helena
Comentado en Brasil el 28 de febrero de 2025
Amei! Comprei porque já conhecia dos EUA. Pena que só tem na voltagem 127 e onde moro é 220. Tive que comprar um transformador.
Fernando J.
Comentado en los Estados Unidos el 23 de enero de 2025
still works after 2ys +, easy to use, perfect bowl each time.. great 1000 watt power. easy to clean, bowl broke no way to get spare , tin 11inch bowl works fine as a alternative. popcorn toppings a must. bowl of popcorn in about 8mins
MRS L NORMAN
Comentado en el Reino Unido el 26 de mayo de 2024
YOUR SELLING THIS IN THE UK BUT IT IS ONLY 110VOLT not good when you buy it for a present and they open it up to use it and can’t, I have had to now order a transformer , hopefully that will do the trick. In my opinion though this should NOT have been sold in the UK with out the ability to switch voltage .
guadalupe
Comentado en México el 6 de diciembre de 2023
Muy aficiente
Mark Manning
Comentado en los Estados Unidos el 28 de marzo de 2020
First off - this is a fantsatic product. It does exactly what you bought it for - it pops popcorn like you wouldn't believe!The unit is made up of : 1)A small plastic lid, 2)A clear plastic dome, 3)A middle part with a two armed toner arm which swirls the popcorn around (very nice!), 4)A bottom unit with a heater coil in it, and 5)An electrical cord.My unit is black and red.Normal usage: 1)Make sure parts #1, #2, and #3 are clean. Wash in soapy water or put in dishwasher. 2)Assemble parts #4 & #3 by placing #3 on top of #4 and ensure the tone arms are locked in place. In other words - if you can still use a finger and rotate the tone arms - then it is NOT locked in place. 3)Put enough oil so there is a bit ONLY INSIDE of the inner most area. Part #3 has two rings inside of it. Oil should ONLY GO in the inner most ring. DO NOT DRENCH IT. Just make sure there is some in the inner ring all the way around. 4)Put enough popcorn kernels into the unit to basically cover the oil. So again - you aren't trying to feed the world! Just enough to cover the oil you put in. 5)Place part #2 (the clear dome) on top of the unit covering part #3. Make sure it actually is fitted together correctly. 6)Ensure the plastic lid is not on the unit. It should be sitting next to it. 7)NOW plug in the unit and turn on the unit. The toner arm should swirl around, moving the kernels. But do NOT panic if it does not. Sometimes the oil will make the toner arm just go over (or on top of) the kernels. Once everything heats up and kernels start to pop - then the rest of the kernels will start moving. 8)Once the amount of popping has gone down - turn the unit off via the switch AND THEN unplug it. 9)Make sure the plastic lid is set away from the unit. 10)Pick BOTH the clear dome (part #2) AND the middle part (Part #3) uptogether, flip it AWAY from you, and set it down on top of the plastic lid. 11)Once the dome is on the lid, lift the middle part (part #3) up, flip it back over, and set back down on the bottom (part #4). Now you are ready to enjoy your popcorn. Put whatever you want onto it. Have fun! :-)Ok - so the Good: It is durable. It does what it is supposed to do. Everything fits together terrifically. The domed lid does NOT crack easily. The dome lid is great for serving the popcorn in. The popcorn pops fantastically well with only a few kernels getting burnt on the bottom and otherwise - just wonderful popcorn!The Bad - The handles are not big enough on the unit. Parts #3 & #4 get REALLY HOT and some of this heat is transferred to the clear dome(#2) above. So it should be emphaized is gigantic letters that you MUST have something to pick up parts #2 & #3 after the kernels have finished popping. Second, it can not be emphasized enough to NOT FLIP the until TOWARDS you. You can get burned easily doing that. Next, the power on/off button is really way too small and hard to use when the bottom is hot. The switch should be changed to a different type of button that can be easily turned on or off.The Ugly: I managed to burn myself badly with the unit. I had made several bowls of popcorn during this past month without any kind of problem Then - tonight. I made a great big bowl of popcorn and when I went to flip it - my fingers slipped and touched the extremely hot middle section. Because there is almost no insulation on this section and because the handles are small - I managed to burn three of my fingers. Luckily, I also had a 2 gallon jug of freezing cold water I had just taken out of the refrigerator next to me. So I slapped the middle part (#3) down on top of the bottom (#4) and then grabbed the pitcher. So far - I am doing ok. But the lesson is clear - that middle section (#3) gets extremely hot. So the ugly truth is - always wear protective gear when dealing with this unit. I happen to have those Teflon gloves they used to sell and will wear them from now on.So, in conclusion: The unit is great. It does exactly what they say it is supposed to do BUT the unit gets very-very hot and if you don't want to get burned like me - wear somethen (or use something) when dealing with it. Don't get burned - literally. Otherwise - fantastic unit!
Productos recomendados