No hay artículos en el carro
No hay artículos en el carroPinflaw - Juego de 2 juntas de manguera de entrada del calentador de coche, repuesto número OEM #15055343 15055342, conector en T de tubo de agua de refrigeración de tres vías, compatible con Cadillac Chevrolet GMC (blanco y negro)
Paul
Comentado en Canadá el 10 de enero de 2025
This sensor switch works fantastic. I used to forget to put on the fan after getting in the shower and then have to contend with a bathroom full of steam which meant I had to turn on the fan afterwards and leave it on after I left the house. Now it just auto turns on when it senses humidity and auto turns off when levels drop. I told my electrician friend about it and he didn't even know this existed. Love this switch!
PNW Mark
Comentado en los Estados Unidos el 12 de abril de 2025
As an electrician, I tackle a lot of DIY projects around the house. When the exhaust fan in our bathroom gave up the ghost, I figured it was the perfect time to upgrade the old manual switch as well. We use a lot of Leviton products at work, so I knew I was getting a reliable brand.The main issue in our household is that my wife enjoys marathon showers and often forgets to leave the fan on long enough to clear out the humidity. This can lead to problems like mold and mildew. Enter the Leviton DHS05-1LW. This switch automatically activates the fan when it detects humidity, ensuring the bathroom stays dry without anyone having to remember to flip a switch.I was so impressed with its performance that I installed these switches in all three of our bathrooms and the laundry room. Installation was straightforward, and the switch's slim profile fit easily into our existing wall boxes. Plus, it can be installed with or without a neutral wire, adding to its versatility.In summary, the Leviton DHS05-1LW has been a game-changer for our home's ventilation. It's a smart, reliable solution that keeps our bathrooms and laundry room free from excess moisture.
ERobillard
Comentado en Canadá el 27 de agosto de 2024
I avoided pulling the trigger until the price dropped but now I wish I'd gone for it sooner. As easy as a lightswitch to install - be sure to turn off power at the breaker before you start. You do need a white neutral, and have extra marrettes or wire couplers on hand. It worked great out of the box, no adjustment needed. Shower starts, fan starts a few minutes later. Afterwards it turns off again once the room is dry. Simple tech that just works.
meine39
Comentado en los Estados Unidos el 8 de diciembre de 2024
I just installed 2 of these in our 2nd floor full baths, and both are working well! They turn on within 30 seconds or so of the showers being turned on in both bathrooms. Both bathrooms have 7.5 ft ceilings, and the fan switches are located no more than a few feet from the tub and shower enclosure.I programmed ours to turn on at the lowest relative humidity (35%) with a 30 minute timeout. Note that after the timeout period shuts the fan off, if the relative humidity (RH) still exceeds the preset percentage limit, the device will reactivate the fan for 50% of the programmed time - so if the timeout is 30 minute and the RH is still too high, the fan will reactivate and run for an additional 15 minutes, which is half the 30 minute timeout I programmed - it will do this 2X if needed, so in that case, the fan will potentially run for a total of 60 minutes if a 30 minute timeout is programmed - programmed time values are 10,20,30 and 45 minutes.Installation is straightforward - I wire nutted the line and load leads on this switch to existing pigtails for the mechanical timer that I replaced with this switch. I added the neutral lead wire from this switch to the existing wire nutted neutral bundle, and the ground lead to the ground bundle.Note that this switch DOES NOT require a neutral, but if no neutral is present, the white sleeve on the neutral lead is removed to re-identify it as a ground wire, and both that wire and the explicit ground lead are both connected to the ground wiring in the box - so while a neutral wire is not required, a ground is required in the box to make this switch work - note that in older homes without an explicit ground wire, sometimes the steel box itself is grounded, so a ground lead could be attached to the box and wire nutted to the re-identified ground lead and explicit ground lead on this switch.There are an impressive number of programmable operating modes and settings within those modes on this switch. Out of the box, the switch is defaulted to operate in bath fan mode, with a 20 minute timeout period and a 50% relative humidity setting, which likely will work fine for many folks.As mentioned, I overrode the default timeout from 20 minutes to 30 minutes, and the relative humidity from 50% to 35% - the programming is a bit tricky and may take a couple passes - best bet if you mess up is to let the programming period timeout so that the settings aren't saved, and then re-enter programming mode after your "practice run" after you have the hang of programming it.Keep in mind too that the switch can be operated manually, and will run for the programmed time when turned on; the automatic operation can be disabled by pressing the bottom of the switch for 5 seconds, and re-enabled by pressing the top of the button.
Malcolm
Comentado en Canadá el 22 de noviembre de 2024
The installation was relatively straightforward, no problems. The switch is doing exactly what I wanted: triggering the fan automatically in a bathroom during showers, with manual triggering as desired.There are three separate settings that you can adjust on the switch, all done by pressing the button in different ways and watching the responses on the LED. That's new to me for an in-wall switch. I took the time to go through all the settings, I ended up not changing any from the defaults. I do have to remember to save the instructions, either paper or PDF, in case I ever want to change the settings.
Productos recomendados