No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Especificaciones:
Tasa de flujo máximo: 50 GPH (190 L/H)
H-Max (Altura de levadura): 61 cm (0,6 m)
Potencia: 3 W
Longitud del cable de alimentación: 1,8 m
Eje de acero inoxidable
Rotor estándar de acero inoxidable, anticorrosión, antioxidante, resistente al desgaste, larga vida útil.
Motor de alambre de cobre
Motor de alambre de cobre 100%, más estable y eficiencia, bajo ruido.
Tubos (I/D 1/4")
El paquete incluye una pieza de tubo libre de 1 m. (I/D 1/4")
Customer
Comentado en los Estados Unidos el 12 de marzo de 2025
This is a nice working very small pump so pay attention to the size. Has good water flow and is very quiet.
Amber Fortney
Comentado en los Estados Unidos el 26 de febrero de 2025
My gecko won't drink from a bowl, he will only drink droplets of water. So I put water in a glass vase, filled the top with plastic plants, and ran the hose up and clipped it in place so the water runs over the plants into the vase. I had to pinch off the water hose a bit because it comes out too fast, but it works great! I change the water and scrub the vase/pump once a week. My gecko loves it.
Guillermo
Comentado en México el 2 de abril de 2025
Cumple con lo indicado
David Cruz
Comentado en México el 9 de agosto de 2024
Para arreglar una fuente de hornato
Works great
Comentado en Canadá el 29 de agosto de 2024
These are small but good flow rate, using them for waterfalls in a paludarium. Highly recommend, only thing is you'll have to get more tubing if your planning on using both at one time. Only comes enough for 1 pump.
OFJO
Comentado en México el 4 de marzo de 2024
Buen producto
Colin
Comentado en Canadá el 4 de noviembre de 2024
Good for making fountains
SARAH
Comentado en México el 12 de mayo de 2023
MUY BUENA COMPRA
Cliente de
Comentado en México el 5 de marzo de 2023
Es práctico, de buen tamaño, eficiente y a un precio razonable
Raúl Bello Miranda
Comentado en México el 4 de septiembre de 2023
Funciona muy bien y es silenciosa
Graphic Fusion
Comentado en los Estados Unidos el 30 de septiembre de 2023
Update Aug 3, 2024: The first pump died after about 10 months of service, running constantly during daylight hours and not running at night. The impeller core was in good condition. The failure was electrical, due to water intrusion around the cord (evidenced by minor corrosion on the copper wires). A resistance measurement across the electrical cord indicates an open circuit. The pump had been submersed at a depth of about 4-5" in deionized water. I had hoped for at least a year of service per pump, so I'm deducting a star - from 5 to 4. It's still a very economical pump, but I will have to keep it on an 8 month replacement schedule, which is sort of a hassle.----------------------------------------I needed a new recirculation pump to replace a pump with a worn bearing (that was squealing). It is used to circulate deionized water through a large heat sink and then through a small radiator with a fan. The "real" pumps are super expensive, with lots of focus on looking "cool." I don't need the "look," and I also don't need to cool the CPU and GPU of a power-hungry gaming computer.So I put this little pump in a plastic storage container with a hole in the snap lid. Water tubes and electrical cord go in and out through the hole, and the hole is sealed up with "dumdum." Easy-peasy. The assembly sits on top of the rack housing, where I can observe the water flowing. No need to bleed it. Just plug it in and go.This pump does not make the design mistake of my previous pump, which is to have plastic friction parts against plastic. It's got a stainless shaft, so it should last much longer. And yes, never trust expensive equipment to a cheapo pump: My solution to that is to place a temperature sensor on the heat sink that will shut the whole operation down if it goes overtemperature. The circulation rate is perfect - just a steady flow. Very quiet. Only 3W. Enough head to do the job.Best of all, I have a spare one in stock, if I need to replace it. And replacement will only take maybe 5 minutes :-)
Raúl Tijerina
Comentado en México el 23 de julio de 2022
Funciona muy bien en la fuente donde bebe mi perroLe gusto mucho
Eduardo Hernández Fuentes
Comentado en México el 7 de mayo de 2022
Todo bien
Productos recomendados
Mex $210.00
Mex $ 109 .00 Mex $109.00
Mex $3,058.21
Mex $ 1,467 .00 Mex $1,467.00
Mex $220.06
Mex $ 114 .00 Mex $114.00
Mex $2,000.35
Mex $ 860 .00 Mex $860.00