No hay artículos en el carro
No hay artículos en el carroHammer
Comentado en los Estados Unidos el 19 de febrero de 2025
It's a perfect fit
Greg Lefevre Media LLC
Comentado en los Estados Unidos el 17 de febrero de 2025
Near ideal replacement. The antenna mounts as the originals do, but connect to the circuit board via wire pigtail not the metal tab of the original. Signal strength and reception level at least as good as original (tested vv a twin unit.)
Juan Rodrigo Sánchez
Comentado en México el 9 de agosto de 2024
Estás antenas trabajan excelente, son muy cómodas y fáciles de instalar, trabajan muy bien con los bodypack Senheiser, las recomiendo
Uriah
Comentado en los Estados Unidos el 13 de enero de 2024
works great, easy to swap out the old antenna with the new one. You will just need a soldering iron and a screw driver (with the proper tips).
Ignacio
Comentado en México el 4 de septiembre de 2024
Exelente
Martin Motnik
Comentado en los Estados Unidos el 20 de julio de 2023
Just replaced two worn-out antennae on two Sennheiser in-ear receivers. This antenna works (tested it last night at a gig) but installation needed a bit of trickery. The original has a short end of the antenna that's just long enough to be soldered onto the motherboard. This replacement antenna has a much longer wire (about 1/2"). You could probably cut it, but I managed to wrap it into a loop and shove it between the two PCBs inside the bodypack. So it's possible to use it without modification, but you have to be careful not to pinch it when reassembling the unit. Also, make sure when you take the bodypack apart to keep an eye on the "SET" and "ESC" plastic buttons. They like to fall out and roll away. Ask me how I know. Just a tip!
Placeholder
Comentado en los Estados Unidos el 12 de enero de 2023
Works perfect as a body pack antenna replacement
Productos recomendados