Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

5 vástagos de válvula de neumático TPMS 20008, vástago de válvula de neumático sin cámara a presión de goma para agujeros de llanta de 0.45 pulgadas en neumáticos de vehículo

Envío gratis en pedidos superiores a Mex $600.00

Mex $491.61

Mex $ 235 .00 Mex $235.00

En stock

Acerca de este artículo

  • Aplicación: estos vástagos de válvula TPMS 20008 se ajustan a neumáticos sin cámara de 0.45 pulgadas de diámetro, longitud total de 2.25 pulgadas, vástagos de válvula estándar a presión.
  • Alta calidad: estos vástagos de válvula de neumático están construidos con núcleos de válvula de latón de alta calidad y goma EPDM resistente al ozono, muy resistente y fiable.
  • Fácil de instalar: diseño de goma a presión, simplemente inserta el nuevo vástago de la válvula a través del orificio de la válvula del borde hasta que se encaje en su lugar, muy fácil y conveniente.
  • El paquete incluye: 5 vástagos de válvula de neumático.
  • Amplia aplicación: vástago de válvula TPMS de tamaño estándar, apto para la mayoría de coches, camiones ligeros, ATV, cortacésped y motocicletas.


Descripción del producto:

Reemplazando OEM #: 20008

Asegúrate de comprar una pieza correcta.

Este no es el sensor completo. Funcionará en todos los sensores TPMS.

Compatible con (funciona para todos los sensores TPMS, más que los datos que se enumeran a continuación):

Buick:

Buick Enclave 2009-2015

Buick Encore 2013-2014.

Buick Verano 2012-2014.

Buick Regal 2011-2015.

Buick Lucerne 2007-2011.

Buick Lacrosse 2008-2015.

Cadillac:

Cadillac Cts 2008-2014.

Cadillac Dts 2006-2011.

Cadillac Srx 2007-2015.

Cadillac Sts 2010-2011.

Cadillac Elr 2014-2015.

Cadillac Xts 2013-2015.

Cadillac Escalade 2008-2014.

Chevy:

Chevy Avalanche 2008-2013.

Chevy Silverado 1500 2008-2015.

Chevy Silverado 2500 2008-2015.

Chevy Suburban 2008-2015.

Chevy Tahoe 2008-2015.

Chevy Traverse 2009-2015.

Chevy Aveo 2008-2011.

Chevy Hhr 2008-2011.

Chevy Impala 2008-2015.

Chevy Malibu 2010-2012.

Chevy Cobalt 2008-2010.

Chevy Equinox 2008-2014.

Chevy Camaro 2010-2015.

Chevy Cruze 2011-2014.

Chevy Volt 2011-2015.

Chevy Sonic 2012-2014.

Chevy Spark 2013-2014.

GMC:

2009-2015 Gmc Acadia

2008-2015 Gmc Sierra 1500

2008-2015 Gmc Sierra 2500

2008-2015 Gmc Yukon

2010-2015 Gmc Terrain

Hummer:

Hummer H2 2008-2009.

Pontiac:

Pontiac G3 2009-2010.

Pontiac G5 2007-2010.

Pontiac G6 2008-2010.

Pontiac G8 2008-2009.

Ford:

2009-2016 F-150

Escape 2009-2016

Furgoneta de la serie E 2010-2016, Transit Connect

2010-2016 Focus, Fusion, Mustang

Expedición 2011-2016, Explorer, Edge, Fiesta, Flex, Tauro.

2011-2016 F-250, F-350 Super Duty

C-Max 2012-2016.

Tránsito 2014-2016

Dodge:

Magnum 2005-2011.

Caravana 2006-2007.

Calibre 2007-2012.

Avenger 2008-2014.

Dakota 2008-2010.

Viaje 2009-2016


David McGee
Comentado en los Estados Unidos el 16 de febrero de 2023
I only needed 1.Slow leakHardest thing was getting old sensor off to pull old valve throughGuess it would have been about the same. But new sensors are only a few more bucks. And if I’d broken the old I’d have new onesIt worksI didn’t break the back bead. So didn’t have to rebalance
billgaten
Comentado en los Estados Unidos el 18 de octubre de 2023
Stems fit nicely in wheels. Quility seems to be decent if not close to oem. Would buy again.
PostHole
Comentado en los Estados Unidos el 11 de enero de 2023
Before ordering, I asked if these fit a 2012 Chevrolet Captiva Sport as it was not listed; the answer I got was definite NO.I wish Amazon would go back to the way questions used to be answered by people who actually have some idea what they are talking about.I did more research and found that they do indeed fit the Captiva and went ahead and ordered them and they are working fine.These are standard (1/2" hole) rubber pop-in valve stems WITH an extension on the inside end where the TPMS attaches.We had a good working TPMS with a badly leaking rubber stem; this fixed us right up.The screw on the original required a tiny Torx bit; the provided screws with these require a standard Phillips driver.I used the original Torx screw so that I would not have one oddball in the bunch.As the only difference between these and a plain old 1/2" valve stem is the provision on the bottom for attaching the TPMS sensor, these can be used anywhere a standard stem is used.In fact, while we were waiting for these to arrive, I installed a plain old lawn-mower stem in place of the leaking stem and the wife put several hundred miles on it.If I needed a 1/2" stem for a non-TPMS application and this was all I had, I would not hesitate to pop one in as I know it will work.If you have a GM vehicle with TPMS, then you should have a set of these laying inside the spare wheel because the day you need one just might be the day the tire shop has ran out.
MIGUEL
Comentado en los Estados Unidos el 29 de junio de 2022
Purchased these to replace my valve stems in my 2016 Yukon to be able to reinstall the wheel sensors to a new set of wheels and it worked perfectly. If you are going to reuse your OEM tpms sensors these will definitely work for that. Excellent value
WADDAH ABDULLAH
It's working perfect same like original
Productos recomendados