No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Bryan Neighbours
Comentado en los Estados Unidos el 13 de febrero de 2025
This sensor does not work on the 5.7l hemi. I bought a Duralast instead.
Bryan Neighbours
Comentado en los Estados Unidos el 13 de febrero de 2025
This sensor does not work on the 5.7l hemi. I bought a Duralast instead.
Bryan Neighbours
Comentado en los Estados Unidos el 13 de febrero de 2025
This sensor does not work on the 5.7l hemi. I bought a Duralast instead.
Bryan Neighbours
Comentado en los Estados Unidos el 13 de febrero de 2025
This sensor does not work on the 5.7l hemi. I bought a Duralast instead.
Bryan Neighbours
Comentado en los Estados Unidos el 13 de febrero de 2025
This sensor does not work on the 5.7l hemi. I bought a Duralast instead.
Bryan Neighbours
Comentado en los Estados Unidos el 13 de febrero de 2025
This sensor does not work on the 5.7l hemi. I bought a Duralast instead.
Bryan Neighbours
Comentado en los Estados Unidos el 13 de febrero de 2025
This sensor does not work on the 5.7l hemi. I bought a Duralast instead.
Bryan Neighbours
Comentado en los Estados Unidos el 13 de febrero de 2025
This sensor does not work on the 5.7l hemi. I bought a Duralast instead.
charles coveleski
Comentado en los Estados Unidos el 5 de abril de 2025
Works .had to drill out old sensor, was in 24 years. Take you tme drilling and stay to from side of engine, this is just ahead of the flywheel !!! Use small bit and slow, you will get it out with no shavings in oil pan !!! Dodge dealer does same in my area .
charles coveleski
Comentado en los Estados Unidos el 5 de abril de 2025
Works .had to drill out old sensor, was in 24 years. Take you tme drilling and stay to from side of engine, this is just ahead of the flywheel !!! Use small bit and slow, you will get it out with no shavings in oil pan !!! Dodge dealer does same in my area .
charles coveleski
Comentado en los Estados Unidos el 5 de abril de 2025
Works .had to drill out old sensor, was in 24 years. Take you tme drilling and stay to from side of engine, this is just ahead of the flywheel !!! Use small bit and slow, you will get it out with no shavings in oil pan !!! Dodge dealer does same in my area .
charles coveleski
Comentado en los Estados Unidos el 5 de abril de 2025
Works .had to drill out old sensor, was in 24 years. Take you tme drilling and stay to from side of engine, this is just ahead of the flywheel !!! Use small bit and slow, you will get it out with no shavings in oil pan !!! Dodge dealer does same in my area .
charles coveleski
Comentado en los Estados Unidos el 5 de abril de 2025
Works .had to drill out old sensor, was in 24 years. Take you tme drilling and stay to from side of engine, this is just ahead of the flywheel !!! Use small bit and slow, you will get it out with no shavings in oil pan !!! Dodge dealer does same in my area .
charles coveleski
Comentado en los Estados Unidos el 5 de abril de 2025
Works .had to drill out old sensor, was in 24 years. Take you tme drilling and stay to from side of engine, this is just ahead of the flywheel !!! Use small bit and slow, you will get it out with no shavings in oil pan !!! Dodge dealer does same in my area .
charles coveleski
Comentado en los Estados Unidos el 5 de abril de 2025
Works .had to drill out old sensor, was in 24 years. Take you tme drilling and stay to from side of engine, this is just ahead of the flywheel !!! Use small bit and slow, you will get it out with no shavings in oil pan !!! Dodge dealer does same in my area .
charles coveleski
Comentado en los Estados Unidos el 5 de abril de 2025
Works .had to drill out old sensor, was in 24 years. Take you tme drilling and stay to from side of engine, this is just ahead of the flywheel !!! Use small bit and slow, you will get it out with no shavings in oil pan !!! Dodge dealer does same in my area .
Customer
Comentado en los Estados Unidos el 19 de agosto de 2024
So far (30 days) or less the product has solved my engine stall/quit problem. Tough to get old one out. I drenched it with nut buster spray over two or three days. Even a garage said the would have to punch it in to oil pan. I ended up drilling and eventually punching it in. Changed oil and filter. Had to use wedge shaped multi diameter drill bit to reshape insertion hole due to corrosion. No stall/engine quit since. I should add that disconnecting battery for 10 mins got it started after stall and no start situations.
Customer
Comentado en los Estados Unidos el 19 de agosto de 2024
So far (30 days) or less the product has solved my engine stall/quit problem. Tough to get old one out. I drenched it with nut buster spray over two or three days. Even a garage said the would have to punch it in to oil pan. I ended up drilling and eventually punching it in. Changed oil and filter. Had to use wedge shaped multi diameter drill bit to reshape insertion hole due to corrosion. No stall/engine quit since. I should add that disconnecting battery for 10 mins got it started after stall and no start situations.
Customer
Comentado en los Estados Unidos el 19 de agosto de 2024
So far (30 days) or less the product has solved my engine stall/quit problem. Tough to get old one out. I drenched it with nut buster spray over two or three days. Even a garage said the would have to punch it in to oil pan. I ended up drilling and eventually punching it in. Changed oil and filter. Had to use wedge shaped multi diameter drill bit to reshape insertion hole due to corrosion. No stall/engine quit since. I should add that disconnecting battery for 10 mins got it started after stall and no start situations.
Customer
Comentado en los Estados Unidos el 19 de agosto de 2024
So far (30 days) or less the product has solved my engine stall/quit problem. Tough to get old one out. I drenched it with nut buster spray over two or three days. Even a garage said the would have to punch it in to oil pan. I ended up drilling and eventually punching it in. Changed oil and filter. Had to use wedge shaped multi diameter drill bit to reshape insertion hole due to corrosion. No stall/engine quit since. I should add that disconnecting battery for 10 mins got it started after stall and no start situations.
Customer
Comentado en los Estados Unidos el 19 de agosto de 2024
So far (30 days) or less the product has solved my engine stall/quit problem. Tough to get old one out. I drenched it with nut buster spray over two or three days. Even a garage said the would have to punch it in to oil pan. I ended up drilling and eventually punching it in. Changed oil and filter. Had to use wedge shaped multi diameter drill bit to reshape insertion hole due to corrosion. No stall/engine quit since. I should add that disconnecting battery for 10 mins got it started after stall and no start situations.
Customer
Comentado en los Estados Unidos el 19 de agosto de 2024
So far (30 days) or less the product has solved my engine stall/quit problem. Tough to get old one out. I drenched it with nut buster spray over two or three days. Even a garage said the would have to punch it in to oil pan. I ended up drilling and eventually punching it in. Changed oil and filter. Had to use wedge shaped multi diameter drill bit to reshape insertion hole due to corrosion. No stall/engine quit since. I should add that disconnecting battery for 10 mins got it started after stall and no start situations.
Customer
Comentado en los Estados Unidos el 19 de agosto de 2024
So far (30 days) or less the product has solved my engine stall/quit problem. Tough to get old one out. I drenched it with nut buster spray over two or three days. Even a garage said the would have to punch it in to oil pan. I ended up drilling and eventually punching it in. Changed oil and filter. Had to use wedge shaped multi diameter drill bit to reshape insertion hole due to corrosion. No stall/engine quit since. I should add that disconnecting battery for 10 mins got it started after stall and no start situations.
Customer
Comentado en los Estados Unidos el 19 de agosto de 2024
So far (30 days) or less the product has solved my engine stall/quit problem. Tough to get old one out. I drenched it with nut buster spray over two or three days. Even a garage said the would have to punch it in to oil pan. I ended up drilling and eventually punching it in. Changed oil and filter. Had to use wedge shaped multi diameter drill bit to reshape insertion hole due to corrosion. No stall/engine quit since. I should add that disconnecting battery for 10 mins got it started after stall and no start situations.
Israel Morales
Comentado en México el 6 de julio de 2024
Bien hasta el momento ya veremos en unos meses
Israel Morales
Comentado en México el 6 de julio de 2024
Bien hasta el momento ya veremos en unos meses
Israel Morales
Comentado en México el 6 de julio de 2024
Bien hasta el momento ya veremos en unos meses
Israel Morales
Comentado en México el 6 de julio de 2024
Bien hasta el momento ya veremos en unos meses
Israel Morales
Comentado en México el 6 de julio de 2024
Bien hasta el momento ya veremos en unos meses
Israel Morales
Comentado en México el 6 de julio de 2024
Bien hasta el momento ya veremos en unos meses
Israel Morales
Comentado en México el 6 de julio de 2024
Bien hasta el momento ya veremos en unos meses
Israel Morales
Comentado en México el 6 de julio de 2024
Bien hasta el momento ya veremos en unos meses
Marie
Comentado en los Estados Unidos el 18 de noviembre de 2024
This fit a 07 grand cherokee 3.7 6 cylinder. worked great.
Marie
Comentado en los Estados Unidos el 18 de noviembre de 2024
This fit a 07 grand cherokee 3.7 6 cylinder. worked great.
Marie
Comentado en los Estados Unidos el 18 de noviembre de 2024
This fit a 07 grand cherokee 3.7 6 cylinder. worked great.
Marie
Comentado en los Estados Unidos el 18 de noviembre de 2024
This fit a 07 grand cherokee 3.7 6 cylinder. worked great.
Marie
Comentado en los Estados Unidos el 18 de noviembre de 2024
This fit a 07 grand cherokee 3.7 6 cylinder. worked great.
Marie
Comentado en los Estados Unidos el 18 de noviembre de 2024
This fit a 07 grand cherokee 3.7 6 cylinder. worked great.
Marie
Comentado en los Estados Unidos el 18 de noviembre de 2024
This fit a 07 grand cherokee 3.7 6 cylinder. worked great.
Marie
Comentado en los Estados Unidos el 18 de noviembre de 2024
This fit a 07 grand cherokee 3.7 6 cylinder. worked great.
Jack
Comentado en México el 5 de octubre de 2024
Muy similar al original, vale la pena, el material es de exelente calidad, los.botones se sientes estupendos. 100% recomendado
Customer
Comentado en los Estados Unidos el 10 de octubre de 2024
Fits well and so far it’s working great. Have had it a few weeks now
Customer
Comentado en los Estados Unidos el 10 de octubre de 2024
Fits well and so far it’s working great. Have had it a few weeks now
Customer
Comentado en los Estados Unidos el 10 de octubre de 2024
Fits well and so far it’s working great. Have had it a few weeks now
Customer
Comentado en los Estados Unidos el 10 de octubre de 2024
Fits well and so far it’s working great. Have had it a few weeks now
Customer
Comentado en los Estados Unidos el 10 de octubre de 2024
Fits well and so far it’s working great. Have had it a few weeks now
Customer
Comentado en los Estados Unidos el 10 de octubre de 2024
Fits well and so far it’s working great. Have had it a few weeks now
Customer
Comentado en los Estados Unidos el 10 de octubre de 2024
Fits well and so far it’s working great. Have had it a few weeks now
Customer
Comentado en los Estados Unidos el 10 de octubre de 2024
Fits well and so far it’s working great. Have had it a few weeks now
Productos recomendados
Mex $910.63
Mex $ 418 .00 Mex $418.00
Mex $1,212.46
Mex $ 557 .00 Mex $557.00
Mex $799.00
Mex $ 407 .00 Mex $407.00