No hay artículos en el carro
No hay artículos en el carro Parámetro
100 % nuevo
Entrada: 100 ~ 240 V CA, 50/60 Hz.
Voltaje de salida: 5 V CC.
Corriente de salida: hasta 15 amperios.
Temperatura de funcionamiento: 0 ~ 40 ℃.
Temperatura de almacenamiento: -20 ~ 60 ℃.
Humedad ambiental: 0 ~ 95% sin condensación.
Cumplimiento de seguridad: CCC/CE.
Longitud del cable de CA: aproximadamente 47.24 pulgadas (120 cm)
Longitud del cable DC: aproximadamente 39.37 pulgadas (100 cm)
Tamaño del cuerpo: 14 cm x 6 cm x 3,6 cm.
Peso: 470 g.
Ten en cuenta que
1) La fuente de alimentación viene con un conector DC hembra. Por lo tanto, puedes atornillar fácilmente cables sin soldadura.
2) No lo utilices al aire última intervensión. No es resistente al agua.
Declaración:
Algunos clientes se quejan de que la potencia de salida de la fuente de alimentación de 5 V es insuficiente. Después de una serie de pruebas, encontramos que la razón es un método de prueba incorrecto, no un problema de calidad.
Debido a la baja tensión y la gran corriente, la fuente de alimentación de 5 V requiere que el cable de prueba sea lo suficientemente grueso y corto, para reducir la pérdida de energía tanto como sea posible.
En comparación con la fuente de alimentación de 12 V y 24 V, si se va a emitir la misma corriente, la fuente de alimentación de 5 V necesita un cable de salida más grueso.
Por ejemplo, si la fuente de alimentación de 12 V 20 A se prueba mediante un cable de prueba de 11 AWG, sin caída de corriente y voltaje, sin pérdida de energía.
Pero cuando probamos la fuente de alimentación de 5 V 20 A, para obtener suficiente voltaje de 5 V y corriente de 20 A, se requiere cable de prueba de 6 AWG.
Si utilizamos un cable de prueba de 11 AWG o un cable de prueba de 6 AWG es demasiado largo, la corriente y el voltaje caerán mucho. Esta es la característica de la transmisión de corriente de la fuente de alimentación de 5 V.
Cuanto menor sea el voltaje de salida, más amplio debería ser el canal de transmisión. Si necesitas un informe de prueba, no dudes en ponerte en contacto con nosotros.
Paquete:
1 adaptador de fuente de alimentación de 5 V y 15 A.
Data
Comentado en los Estados Unidos el 8 de septiembre de 2024
I own many Alitove products and keep coming back for more. All their products I've received have been flawless and this PSU is no different. I've been putting it under heavy load for a while now and it's working great. Highly recommended.
Jazzy M
Comentado en Canadá el 21 de febrero de 2023
Updated review:After getting contacted by the seller, a replacement power supply was shipped under warranty. The replacement works great!Original review:When connected to a small LED strip, the voltage drops to 4.95V. The female DC barrel connector is also defective and does not work properly (used another barrel connector I had on hand to test). The warranty request page on the manufacturer website is broken, hence returned the product.
Jerry M.
Comentado en Canadá el 29 de agosto de 2022
I have this power supply connected to an ESP-32 running WLED and an addressible RGB Strip (5 meter, 60 led/m, 300 led total, maximum possible draw of 18 amp, limited to 12 in software for the longevity of the power supply & strip.)Initially, the power supply worked with 0 issues with the positive and negative wires connected to the included DC Jack/Terminal. Unfortunately, after about a week of usage my lights suddenly stopped working and isolated the issue to be related to this power supply.The reason this product still has a 5 star review from me is the amazing customer support, I contacted them and within afew days of my original unit breaking I received a new one in the mail, but the story doesn't end there.While I was waiting for my replacement I discussed my issue with some others and read more reviews of this product, which had complained about the DC Jack, so when my new unit arrived I decided to investigate. And the other reviews were right, when I swapped out the Screw Terminal for the one in my replacement, the lights worked again, the actual power supply had never died, just the adapter.Unfortunately, after only afew hours of usage with the new adapter, I lost power ONCE AGAIN! I decided it's probably in my best interest to skip the adapter and to simply strip the wires on the power supply (if you think about it, it goes from wires, to male DC, to female DC, to a spot to plug in wires, to wires, it's simply one more point of failure.)Since I stripped the wires and connected it completely I have experienced 0 issues with the power supply, and would recommend it to someone else trying to make a diy argb lighting solution, but I would recommend them to strip the wires from the start rather than using the Terminal (and I belive I would recommend this regardless of the power supply used since I have gained knolege from this experience)Photo 1: Afformentioned Screw TerminalPhoto 2: Lighting power solution after wired have been stripped
Bryden
Comentado en Australia el 9 de septiembre de 2018
Used this to power some smart-RGB lights. Works great.
Khaled Kanj
This is the 3rd one I've had to return because it is faulty and output voltage is off. Listed as 5v, in fact is 4.7v. No quality control whatsoever
Productos recomendados
Mex $290.00
Mex $ 153 .00 Mex $153.00
Mex $507.31
Mex $ 273 .00 Mex $273.00
Mex $159.00
Mex $ 95 .00 Mex $95.00