No hay artículos en el carro
No hay artículos en el carro
- Mide el rango de corriente de CC 0-50 A.
- Escala clara y fácil de leer y un botón para ajustar la esfera.
Bruce Sayre
Comentado en los Estados Unidos el 24 de agosto de 2024
Used to replace broken meter in an older battery charger. Slight modification to mounting opening. Works as it was intended.
House Builder
Comentado en Canadá el 3 de julio de 2023
The first thing that you need to know is how to properly connect an ammeter, which is in parallel with the shunt. Connect the positive lead from the battery to one end of the shunt. Connect the other end of the shunt to the load, i.e., the appliance, that you are powering. At this stage your appliance will work like before. The only difference is that current flows through the shunt instead of directly through the wire. Now, connect the meter to the shunt. The back of the meter is marked plus and minus. Connect the plus post to the same side of the shunt to which you connected the positive lead in the first step. Then, connect the minus post to the other end of the shunt, where you connected the wire carrying current in step two. If you are careless and connect the leads the other way around the needle may swing the wrong way and damage the meter. The diagram is for a voltmeter and an ammeter, as I installed both to monitor output from my solar array. The meter seems to be good quality with an attractive appearance and is easy to read. Also, easy to install. It is easier and more accurate if you first make a paper template and then use it to properly position the meter and drill the holes.
Bob F
Comentado en los Estados Unidos el 30 de julio de 2022
Got this for an atx power supply build. Not much to say... It works like it should, built well, and accurate. Came with the shunt as well. They didnt send the 4" of wire required, but also forgot to include the dancing girls. Go figure. Other than that, great product from a great merchant.
Johanne Beaudoin
Comentado en Canadá el 26 de octubre de 2021
très satisfait et très bon achat.Merci a votre équipe
Gabriel M.
Comentado en México el 19 de septiembre de 2021
Mala calidad del grabado de números, se borran al limpiarlos. No recomiendo
Michel Gauthier
Comentado en Canadá el 3 de diciembre de 2019
mesurer mes ampères que ma plaque solaire fournit a mes batteries.
Productos recomendados
69C17 DC 0-50A Amperímetro analógico amperímetro analógico (model: D9610OIV-9977EI) medidor de panel
Mex $325.79
Mex $ 156 .00 Mex $156.00
Mex $215.42
Mex $ 109 .00 Mex $109.00
Mex $444.00
Mex $ 226 .00 Mex $226.00
Mex $192.36
Mex $ 115 .00 Mex $115.00
Mex $289.99
Mex $ 150 .00 Mex $150.00
Mex $264.07
Mex $ 137 .00 Mex $137.00
Mex $415.44
Mex $ 211 .00 Mex $211.00