No hay artículos en el carro
No hay artículos en el carroMás información del producto
- Rodillos de 14 pulgadas
- Altura ajustable de 23 a 91 cm
- 136 kg. Capacidad de peso
Rodillo transportador ajustable
El rodillo transportador ajustable PM-2700 es una pieza versátil de equipo que querrás en tu tienda. Este accesorio de doble función se puede utilizar como una mesa de salida portátil e incluso como una plataforma para ayudarte a mover materiales grandes o pesados por toda la tienda.
- La longitud se expande de 37 cm a 127 cm
- Altura ajustable de 58 cm a 91 cm
- Los rodillos de 35,5 cm de ancho permiten que tu material se deslice con facilidad
- Capacidad de peso de hasta 136 kg. (136 kg)
- Los ganchos integrados te permiten fijar 2 o más rodillos PM-2700 juntos
- Las ruedas de bloqueo ruedan suavemente a la ubicación deseada y bloquean sólidas para mayor estabilidad
Laterales de bloqueo
El marco se expande y bloquea la roca sólida, al igual que las ruedas. Los ganchos integrados te permiten conectar dos o más PM-2700 juntos, lo que te da opciones de movilidad casi ilimitadas. ¡Así que puedes mover material a través de la tienda!
Maneja grandes trabajos
Los rodillos de 35,5 cm de ancho son suaves en funcionamiento, lo que permite que tu material se deslice con facilidad. Y puede soportar hasta 300 libras, por lo que los trabajos grandes no son un problema.
Versátil
Las marcas de medición a lo largo de las piernas garantizan un espacio de trabajo nivelado… a menos que prefieras tener una pendiente, y por supuesto, eso es posible.
Se pliega para almacenamiento
Cuando termines de usarlo, el rodillo transportador se pliega para un fácil almacenamiento hasta la próxima vez.
Rodillo de alimentación móvil
Utilice el rodillo transportador como mesa de salida móvil para tableros grandes o material de hoja. Simplemente ajusta la altura del nivel de los rodillos con tu sierra de mesa para manejar los grandes trabajos fácilmente.
Asistente perfecto
El PM-2700 puede ayudarle a trabajar solo ayudándole a procesar tableros grandes sin la ayuda de otra persona. Puede soportar hasta 136 kg y la altura se ajusta hasta 91 cm.
Customer
Comentado en Canadá el 17 de agosto de 2024
Works well as an off cut table for table saw. Only issue is a sheet of plywood is too large, I bought 2 so I could support both edges.
T. Wende
Comentado en los Estados Unidos el 11 de mayo de 2024
I'm a little puzzled by the assertion that he height adjustment scratches the tape. Just turn the posts 90 degrees during assembly and the locking bolts won't contact the tape. Problem solved.Legitimate criticisms: the rollers aren't coplanar when the stand is fully extended. That's correct; every other roller is approximately 1/8" lower. This doesn't impede function in my case, but if you intend to use the rack for anything other than infeed/outfeed support, especially if you are intending to move heavy items on a conveyor line, this MAY matter.Like other reviewers, I wish that the rack could be adjusted an inch or so higher because it cannot be set high enough to be coplanar with my Bosch saw on its gravity stand. An inch of drop at a table saw's outfeed is no big deal at all, but it can matter when supporting heavy stock for crosscuts. It's a simple issue to overcome; I put some 3' long scraps of 2x6 lumber under the casters. It's quite safe because the casters Do. Not. Move. once locked.I also agree that scaling the legs' measure to final height would have been useful. In my case, it's not essential since my slab isn't level and I use the measures relative to one another and then dial in final height and level at each leg. It takes a couple of minutes.to set up, no big deal.The rack has enhanced my ability to cut large stock safely and accurately with a jobsite saw. It collapses and stays out of the way when I'm not using it. It rolls around smoothly on large casters and stays put when the casters are locked. The (inbuilt) ability to gang multiple racks together and to create 90 degree turns in a conveyor line may appeal to some, but if that's your use case, then the non-coplanar rollers at full extension may cause you to look elsewhere.Overall, I'm deducting one star from value for money because I believe the rack to be a little pricy given the limitations mentioned above. However, overall, I'm pleased enough with its sturdiness, flexibility, utility, quality of fit and finish, and footprint when collapsed to consider buying a second one.
James B.
Comentado en los Estados Unidos el 27 de diciembre de 2024
Well built, sturdy and stable.
Serious Consumer
Comentado en los Estados Unidos el 10 de agosto de 2023
I purchased 2 of these Bora Portamate PM-2700 Adjustable Conveyor Roller stands and they work very well. The sturdiness surprised me and the rollers easily flow with moving product along the tops.I only have one gripe and that is I wish they would have made the stand adjustments higher as they barely make the correct heights of my table saw and router table.Honestly, the legs are just too short and they need to be long enough so that you are able to reach your equipment and tightly secure the legs to metal without them falling out."An accident waiting to happen"!
Peter J Martucci
Comentado en los Estados Unidos el 20 de julio de 2023
Product works as advertised and I do like having it. However, when you want to adjust for the height, the scale on the legs doesn't make much sense.Not sure why they didn't just put a scale that equates to the actual height, but it doesn't. For example, I have mine set to an actual height of 35 3/8, yet the scale on the legs read 11 11/16. Can anyone figure that one out?Why wouldn't you just calibrate the scale to match the actual height? Something Bora may want to incorporate. Work smarter, not harder.That is the main reason for the overall 3 stars. If you are ok setting heights up the way I did using just a level and the true height you need, then this is five stars.Bearings work flawlessly and the unit is very smooth to move around.Expanding and collapsing the unit is super simple and smooth.Overall, I recommend it.
Productos recomendados
Mex $300.00
Mex $ 162 .00 Mex $162.00
Mex $291.00
Mex $ 142 .00 Mex $142.00