Muy buena calidad he comprado al rededor de 6 rotuladoras y todas en perfecto estado

The P-Touch PT- D610BT failed to turn on right out of the box. I hope it's just a one-off.I will be returning it and getting a new one for a work project.

Very professional

Excelente producto

Fue un regalo y ha servido bien desde que lo pedí, todo bien y me gusta que trae varias opciones

Quite a versatile device with many options of cartridge sizes, fonts, etc.

Me gusto la calidad del material utilizando los cartuchos originales de epson algo costoso pero lo ocuparé para etiquetar cableados de red y telefónico

Muy practico y facil de usar adecuado para la utilidad requerida del etiquetado de equipos de proceso de la planta

HIGHLY recommended labeler! I've owned a non-discontinued P-Touch PT-6100 for years and years. Still works great, but only takes a max of 12mm wide tapes. Time for wider! I'm pretty good with mechanical stuff and was EASILY able to get this running, no manual required (although one is packed and will make good bathroom reading at some later date for the details, lol). Here is a quick-start guide:)* Take the unit out of the plastic bag and peel off the protective film on the top over the display window and one behind it that will show the tape cartridge label.* Flip the unit over, setting it on a towel or it's box to protect the screen, and take off that battery cover. Insert 6 AA batteries like in the photo here, but - pro tip, lol - there two kinds of AA these days. Either will work, but the ones labeled "Max", or in this case "EDGE" from a big box tool store, have low internal resistance, meaning the voltage will stay constant longer. They cost a bit more, but you get what u pay for! Put the battery cover back on. Pro-tip #2: rotate the batteries so that a word printed on them faces up, like I've done with EDGE here. That lets you easily see if you have them all in the correct direction.* Flip the unit back over and NOTE, the tape cartridge bay cover is the back 1/3 of the top plastic with the display window. You can see the two hinges in the back. There are finger holes on the left and right side where the words "Brother" and "P Touch" are at. Stick ur fingers in those and gently pull the top up to expose the tape bay.* A TRICK! That white lever must be pulled up to get the cartridge in, and it STAYS UP when you close the lid. The level pushes the tape against a roller. Closing the lid will do that for you. The lever on mine was down and needed to be pulled up initially.* Open up the 24 mm (1") tape cartridge the unit comes with. NOTE! It says SAMPLE which usually means it is only partially filled as a demo. Don't be surprised if it runs out quickly. Time to get an order for more tapes in here at Amazon.* Orient the cartridge as shown on the plastic in the bay. The tape will go out of that hole in the case on the left. Then just gently press it down.* Close the lid (with lever up).* Press the red "on/off" button on the left for one second or so. The unit starts up and asks for your language. THAT IS IT! You are ready to label! Start typing in what you want. Press the "caps" key if you want all caps, like I did in the photo here.* When done, hit the green "print" button on the right. It will come up asking how many to print, which is pretty cool! It defaults to 1, so if you just want one all you need to do is press print again. No need to enter anything.* And away it goes! This unit has an electric cutter which is so nice. The old PT-6100 was manual cut, had to press a lever.* SUPER IMPORTANT PRO-TIP: IF YOU ARE STORING THE UNIT FOR MORE THAN A YEAR, TAKE THE BATTERIES OUT AND PUT THEM IN A SMALL ZIP BAG YOU CAN KEEP WITH THE UNIT. ALL BATTERIES LEAK CORROSIVE GOOD STUFF AFTER A FEW YEARS. DON'T TAKE THE CHANCE!Happy Labeling!

What I don't like is that every new print, it will waste some material during cut. I don't know about other machines, but this one, you can't set it otherwise. The next thing, to my surprise, it looks prehistorically bulky.

Es un buen producto

Funcionó para los que lo necesitaba. Gran calidad.

Si lo que buscas es mantener todo bien organizado este es el producto que necesitas, pareciera que esta versión de etiquetadora estuviera reservada para su uso en pequeños negocios o negocios medianamente grandes. Pero la verdad es que funciona muy bien para su uso del dia a dia en casa. gracias a que esta versión se puede conectar a una computadora puedes diseñar etiquetas mas complejas, con fondos de color negro, imágenes, iconos, diferentes tipos de letra. Este tipo de diseños se pueden hacer en la aplicación de celular pero esta limitada, en donde puedes sacar su máximo potencial es en la computadora.Los cartuchos mas grandes de 24 mm son caros, pero los mas queños son un poco mas baratos, pero para que en verdad le saques provecho si aconsejo usar las de 24 mm, si no, mejor valora comprar la edición anterior a esta.