Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

CDBP - Cuchillos de corte de carburo cuadrado de 14,3 mm con 2 bordes de corte de 14,3 x 14,3 x 2,0 mm-50 ° para King Canadá/Rikon/Cutech/Craftex/Magnum/WEN Cabezal de corte en espiral, 10 piezas

Envío gratis en pedidos superiores a Mex $600.00

Mex $487.53

Mex $ 238 .00 Mex $238.00

En stock

1.Tamaño:10.5x10.5x1.5mm-35°


  • Fácil de operar, cada hoja tiene 2 bordes afilados, si uno es aburrido, simplemente cámbiela al otro lado.
  • Tamaño estándar: 14,3 mm, forma cuadrada, 2 mm de grosor, ángulo de corte de 50°, 2 bordes.
  • Las esquinas del cortador de carburo son muy afiladas sin prácticamente ningún radio. La mejor opción para girar perfiles rectos y esquinas interiores de casi 90°.
  • Aplicación: maderas duras y maderas blandas, HDF, MDF, madera contrachapada, aglomerado, tableros de partículas, etc.
  • 10 piezas por caja, empaquetadas con un recipiente de plástico para un almacenamiento seguro y fácil.



Descripción del producto

Área de contacto
FD14.3

Inserto de repuesto de carburo CDBP

Tamaño: 14,3 mm de largo x 14,3 mm de ancho x 2 mm. Grosor: Carburo de tungsteno sólido. Forma: 2 bordes, ángulo de corte: 50 grados. Agujero: Un agujero avellanado

Compatible con:

WEN PL1326 - Cepilladora de espesor en espiral de 13 pulgadas (por favor, no los utilices entremezclados con las cuchillas originales de 14.25 x 14.25 x 2 mm. WEN JT630H - Junta de sobremesa en espiral de 6 pulgadas, WEN JT833H - Junta de sobremesa en espiral de 8 pulgadas

FD14.3

FD14.3

FD14.3


PlusPlus
Comentado en Francia el 22 de marzo de 2025
Correspond à mon besoin.
Jesse
Comentado en Canadá el 10 de abril de 2025
Im wondering if I was sent used sets somone else had already returned. I installed 26 of these in my 13" planer and tested on some 4/4 cherry. The cherry boards were only 7.5" wide and the machine was absolutely screaming during the cut. Wood came off in sawdust not shaving. The machine that worked fine before could no longer force the boards through the blades and would stop feeding mid cut. These teeth left a terrible finish with peaks and valleys all over the work piece, suggesting the blades are not all the same dimension. For over $30 per package of which I needed to buy 3, I expected blades that would actually work. Not impressed considering the time and money i have wasted on these. They will be returned.
asillycoder
Comentado en Canadá el 30 de julio de 2024
Seems to be much stronger metal than what came on the Craftex Helical 13" planer. Will continue to replace dull blades with these as the original ones seem to go dull pretty quick. Not sure if this is just that I'm putting a lot of material through my planer, unrealistic expectations of the original/previous blades, or bad original blade quality that was on the planer before. But I do know that the few I did replace are holding strong and the blades I didn't replace will be getting replaced with these.
Bartsch
Comentado en Alemania el 7 de marzo de 2024
Top Qualität zu fairen Preisen! Ich würde diese Wendemesser immer wieder kaufen!
Customer
Comentado en Canadá el 25 de septiembre de 2024
love these multi-pack with fine product that is sharp and a proper angle
Productos recomendados

Mex $229.00

Mex $ 116 .00 Mex $116.00

4.5
Elegir

Mex $680.62

Mex $ 367 .00 Mex $367.00

4.8
Elegir