No hay artículos en el carro
No hay artículos en el carroEste conjunto de motor y regulador de ventana eléctrica de repuesto está diseñado con precisión y ampliamente probado para que coincida con el ajuste, la función y el rendimiento exactos del regulador de ventana en años, marcas y modelos específicos de vehículo.
Hands On Detail Mike Bottoms
Comentado en los Estados Unidos el 27 de marzo de 2025
Great product, works well, easy to install, at a great price!
Chuck
Comentado en Canadá el 23 de octubre de 2023
If you're handy you can save a bundle by replacing your window regulator yourself. Before replacing the regulator make sure there isn't a power issue to the door such as a faulty window switch, blown fuse or damaged wiring in the flex boot to the door (I found broken power supply wires from years of bending on a back door of the same vehicle & the original regulator was fine). Usually the regulators fail with a broken/unraveled cable and the motors are often good (so if you hear the motor move it is probably getting power). This Dorman brand window regulator (Made in Taiwan) is slightly different than the original but fit well in the door of a 2002 front door (all bolts lined up and fit). You can use the Amazon vehicle fit check but suggest you also go to the Dorman website to verify the correct part number. The regulator comes sealed in a plastic bag (you have to cut to open) to help verify it is new and not previously installed. There are very basic generic instructions but I really recommend you search U-tube for a regulator installation specific to your vehicle (each door has some tricks to get them apart). Some of the connectors are tricky and you need small screwdrivers/picks to finesse them apart (In my case the hardest one was releasing the holding clip for the regulator connector in which you need to insert a small screwdriver from the bottom). You can use a large suction cup to hold the window up in the closed position so it is out of the way to pull the regulator out. Also while the window is raised, recommend cleaning the window track and spraying in some dry teflon lube to smooth out the sliding action (spray the upper side of the track when the window is down after installation). I only needed a #2 phillips, 10mm socket drive and small & medium flat screwdriver, LED work light and some nylon pry tools (other vehicles could be different). The factory seal for the vapor barrier had hardened (semi-solid gumbo) and would not release without damage, so I carefully cut the seal (not the plastic) from the outer edge by extending the blade of a box cutter by 2-3 inches and gently working in a sawing action while pulling until enough access was gained, the seal could simply be pressed back together during re-assembly. Regulator pulls out/in from the large opening in the door cavity (might have to collapse slightly). The regulator works smooth and quiet albeit slightly slower than the original, maybe 85% as fast but no big deal. I expect it to last the remaining life of the vehicle. Hope this helps and good luck with your repair!
S.H.
Comentado en los Estados Unidos el 29 de septiembre de 2021
Easy to install. It works fine in my car even though it looks a little different.Only thing I didn't like was I had to loosen one of the tabs that attach the cable to the door so that I can move it to the mounting hole. It would have been much better if the tab was supplied without being installed on the cable.
ted grahame
Comentado en Canadá el 26 de septiembre de 2019
Perfect fit. Great delivery. Exactly as advertised.
JunkiePurchaser
Comentado en Canadá el 17 de febrero de 2018
Excellent Product , installed with ease. And product arrived quickly and well packaged .
Productos recomendados
Mex $1,740.19
Mex $ 696 .00 Mex $696.00
Mex $809.69
Mex $ 421 .00 Mex $421.00
Mex $791.01
Mex $ 427 .00 Mex $427.00