No hay artículos en el carro
No hay artículos en el carroSteven Matthews
Comentado en los Estados Unidos el 25 de marzo de 2024
Wet dry sandpaper
Andrew K
Comentado en los Estados Unidos el 23 de junio de 2023
I ordered and used the 1500, 2000 and 3000 grit paper for tuning up a couple hand planes was happy with the results. The backing is more of a plastic than paper which made it a lot easier to peel off the plane body and surfacing plate since it was more resistant to tearing.I’ve tried a number of different brands of paper, including the 600 and 800 grits of this brand, and the adhesive on these rolls have the perfect balance of holding power and release. Most other brands either leave residue/adhesive behind after removing the paper, which is a pain when using a surfacing plate, or the edges start to curl especially with moisture. This stuff stays put and peels up in a breeze. Can’t speak for every application but for flattening/polishing I would highly recommend.
Greg
Comentado en los Estados Unidos el 3 de agosto de 2022
I recently put 4 coats of spar varnish on my wooden canoe and after a week of curing, wanted to get started on removing all the dust nibs and brush strokes. Starting with 1000 grit 3M wet sandpaper, it seemed the 1500 Grit Dura-Gold worked as well and lasted longer before getting clogged with the still soft varnish.After trying a bunch of different sanding block/paper combinations, it seemed the Dura-Gold worked best stuck on a big Dura-Block for the flatter areas like the boat bottom, and for slight curves I used a Holey Terror from Motor Guard. It didn't stick very well to more flexible sanding blocks in tight curves, and eventually water would get under the plastic backing and loosen the adhesive.Still, the Dura-Gold worked great. The surface is smooth and fair, and if I didn't have so much 3M 2000 and 3000 grit, I'd give the Dura-Gold 2000 and 3000 a try before going onto polishing. Next time.
robert g
Comentado en los Estados Unidos el 2 de septiembre de 2022
seems to work great on any type surface.I have used it on car fender, fiber glass car and oak wood so far.with great results, stays stuck to the sanding block very well.
Terryh
Comentado en Australia el 24 de noviembre de 2020
A great continuous roll of 1500 grit paper, it has suited my requirements by cutting into various sizes to suit my applications. The quality/price is good and proved easy to paste.
Productos recomendados