Llegó bien el artículo ya lo pondremos en uso a la brevedad, de momento se ve bueno

This temperature controller is a game-changer! It’s easy to set up and works perfectly for controlling temperature in my reptile tank. The dual heating and cooling modes are perfect for controlling both ends of the spectrum. It’s reliable and has helped me maintain precise temperature control. Highly recommend this product for anyone needing temperature regulation!

Me ha servido mucho para controlar la temperatura de la fermentación de cerveza. Además, aunque siempre lo cuido, ha soportado agua, polvo y sol del exterior.

Fácil de usar, cumple con su función y es un excelente producto. Muy buena calidad. A parte cuenta con un año de garantía directamente con el fabricante.

Yo lo estoy utlizando para poder controlar el encendido y apagado de uno de los ventiladores del acuario, es muy funcional y preciso

MUY FACIL DE PROGRAMAR, EL ENVIO FUE INMEDIATO, LLEGO EL PRODUCTO EN EXCELENTES CONDICIONES, ME LLEGARON CORREOS PARA CUALQUIER AYUDA QUE REQUIERIERA, EXCELENTE COMPRA Y HA SIDO MUY UTIL EN MI PROPOSITO DE MANTENER LA TEMPERATURA DEL CONGELADOR EN EL PROCESO DE LA FERMENTACION DE CERVEZA QUE ES DONDE LO UTILIZO. EXCELENTE!

Súper fácil de usar no se calienta y le conecte un calentador de 1500w siempre checo la temperatura en mi iPhone ; lo único q me gustaría sería q tuviese un botón para apagar o encender desde la app sin tomar en cuenta la temperatura

I use it for a heater on a turtle tank, works great. Very accurate. Not using it for cooling of any kind but I imagine that works well too.

Utilizo el controlador para regular un refrigerador modificado como cámara de fermentación, y funciona perfecto. Es fácil programarlo y modificar los settings. Aunque tarda varios segundos en entregar la temperatura precisa, no sirve muy bien como termómetro para tener medidas rápidas, en caso de necesitarlo.

great product. it works just as advertised. a lot of adjustments can be made, and the smartphone app can make all of them remotely, its super convenient. only a few minor things that i believe could be made better.1. while the device WILL connect to google home and register as a device, google home has litterally no control over it, or ability to tell what the temperature is. since you can just use the inkbird app (or tuya app) this is really a nonissue. just a suggestion really.2. the increments of time are quite broad. its not possible to have it log the temperature every minute in history, i believe it only logs every 15 minutes. IT DOES REPORT LIVE AND CONSTANTLY, UPDATING IN MERE SECONDS VIA LIVE VIEW IN THE APP, it is constantly updating and providing a realtime temperature in the app however it only logs the temperature and stores it once every 15 minutes. if it could be changed to log temperature every minute as an option that would be useful. again just a suggestion. its not really that helpful for anything, i just like to see everything going on.3. upon changing any settings on the temperature controller it automaticly assumes that it needs to start either A cooling or B heating if the temperature isnt exactly what the set temperature is at. also sort of a non issue since once it reaches the temperature it reverts to normal operation, meaning the temperature differential, or the setting that adjusts how far from the set temperature it can change before enabling or disabling the cooling or heating system, once temperature is reached after setting a setting in the app or on the controller, works perfectly fine. however if you just want to adjust it so it 1 degree higher in the cooling differential, if you adjust it so it has a 5 degree cooling deviation instead of four, if the temperature is, lets say 78 instead of 75, although its only a 3 degree difference, since you just set the setting it automatically assumes that the temperature needs to be adjusted until it is at the correct temperature before starting operation normally. (just being clear) this is a setting i would want to have an adjustment on. like "restart device upon changing settings? yes or no" then if no is selected, when temperatures are changed if its still within range itll turn off.an example of how this would be useful is if you wanted to adjust the cooling differential higher so the cooling switch turns off, it will ironically turn it on upon making the change, which will immediately have the opposite effect as intended, until it reaches the set temperature, then will use the input settings and resume normal operation. this is the only issue i could see potentially being problematic if you have this placed somewhere with frequent power fluctuations, because when the device restarts it also does just this. checks the temperature and then goes "is it the exact set temperature? no because its off by .1? turn on the heating or cooling." again, just a small pet peeve, not a major issue, but this could be problematic as a UPS battery backup would likely not be able to power any real kind of cooling device and a high power relay of some sort would have to be used to allow power for any high consumption devices to be drawn from elsewhere and the temperature controller to be the only thing drawing power from the ups. that way when the power returns on the temperature sensor never turned off and does not restart.overall i woudl give 4.5 stars if i could because realisticly this is the only product on the market with these features in general, the features being wifi connectivity and the ability to just plug whatever you want into the controller and control both heating and cooling from the same device, as to save power.just my two cents :)

I have used the ITC 308 for years and found it to be extremely reliable, this WiFi version seems to be identical as the original making me think that it will also be reliable. It is extremely easy to set up using the App and the WiFi makes monitoring your beer and adjusting the temperature extremely convenient from your phone. I'm looking forward to continue using this for many brews. Cheers

I am very pleased with the performance of this Digital Temperature Controller. In fact I bought two of them. I have used it to control the temperature of Kombucha, Spirulina, and several other items. It can control 1200 watts at 110 Volts. That means you can plug a standard chest freezer or refrigerator into the device and control its temperature to be something other than normal appliance operating temps. I have also used this to sound an alarm when cooking temperatures get to a specific number. Works great when trying to optimize Sulforaphane in broccoli!After you get used to setting the unit, it becomes easy to do. Just hold the set button for 3 seconds to get into the programming mode. Then scroll through the options. When done, hold the set button for another 3 seconds to lock in the program. No need to scroll through all the options. The main function you might use would be the TS which is Temperature set value. HD and CD which is how many degrees difference you want to allow between the set value and the actual value. (Usually only a degree or two)You will also want to set AH and AL which will activate an alarm if your temperature gets too high or low. There is a helpful indicator light that will show you if the unit is in heating or cooling mode. When in heating mode the unit will apply current to the 120 V “heat connector”. When in cooling mode the “Cooling” connector will be energized. The connectors are standard 120 V receptacles.My experience is, this unit is very reliable and keeps the temperature of your project very close to the temperature you set. I would not hesitate to buy it again or recommend it to a friend. In fact, I did recommend it to a friend. He wanted an alarm to sound when his deep freezer fails to keep his frozen items at the desired temperature! Works great for him, he loves it too!I have no conflict of interest in writing this review. I am just a happy customer and I am happy to report that I was able to resolve a minor issue with the seller and found them to be very supportive and professional.

Excelente, necesitas un control de temperatura fácil de usar? Este es. Yo lo uso para home brewing y funciona de maravilla, fácil de programar, el termómetro es largo y lo puedes meter a la olla de agua caliente, muy útil para mashing. Puedes conectar fuentes de frío y calor al mismo tiempo así que es muy bueno para controlar la temperatura de fermentado (pienso comprar otro para eso). Amazon prime excelente con un pago extrañen llego al día siguiente. Muy satisfecho con la compra.