No hay artículos en el carro
No hay artículos en el carro
El escariador de mango en T es una herramienta útil para quitar rebabas de madera, tubos de corte, tubos, plástico, madera y tableros de pared.
Especificaciones:
Material: acero 45#
Color: como se muestra en la imagen.
Peso: 90 g, 105 g.
Diámetro:
1/8" a 1/2" (3.18-12.7mm)
0.2 a 0.6 pulgadas (5-16 mm)
Conicidad del producto: 1:10
El paquete incluye:
2 escariadores cónicos (1 x 3-13 mm, 1 x 5-16 mm).
veritas
Comentado en Australia el 26 de julio de 2024
Exactly as pictured in the listing. I bought these to ream out an acoustic guitar's bridge pin holes to the larger shank size with a correct taper for an upgrade to bone bridge pins. Nice and sharp, they enabled me to get the job done quickly to a professional standard for a perfect fit. Made the job easy to do, and importantly properly. Recommended. Would buy again suited to purpose.
T.M.
Comentado en los Estados Unidos el 1 de enero de 2024
These seem to be good quality reamers. So far I have only been using them on plastic, which they cut like butter. They seem like they will work well on metal too, but I haven't actually tested that. They make nice round, but slightly tapered holes (these are TAPERED reamers after all). When using these on thick plastic, I do both sides to reduce the taper. On sheet stock the taper isn't an issue.My only complaint is that the cross bar "handles" (torque bars?) don't have any sort of retention, they just fall out if you don't hold them properly, which also means you need to make sure that the bars don't get separated in storage/transport. Of course you can just use a small Phillips screwdriver as a handle, but it would be nice f they stayed in the tool. You could probably heat them up and flatten the ends with a hammer, but that's a lot of effort for a minor issue.
GD
Comentado en Australia el 14 de agosto de 2023
Purchased this product to bore larger guitar machine head post holes for fitting bigger tuners and therefore, the damage which was located toward the pointy end, and was present upon opening my package, had no bearing on completing that particular task. However, if I had needed to bore a smaller hole size it may not have turned out so well at least in the case of one of the reamers. Damage upon opening the package was only present on 1 of the 2 provided, and on a single cutting edge. Forgetting the damage for a moment, the product/s themselves worked well and seem of quite reasonable quality IMO. Again, IMO, the price they cost was also very reasonable. Delivery was very quick, I.e., within 48 hours and on a Saturday no less when purchasing against a countdown timer for guaranteed delivery time. Back to the damage - in the grand scheme of things it didn't matter for the task I had at hand, but I would advise the seller to QA check before sending out and/or, if that is in fact done and no damage was identified at time of sending, ensure that the items are better packaged so as to avoid damage which may have in fact occurred via the selected delivery agent. Good product - just a little disappointed in the brand new condition I received mine in is all :)
Josh
Comentado en los Estados Unidos el 30 de diciembre de 2023
These are just what I needed for deburring tubing and helping to reshape the ends of pipes that have been dented in. The fluting makes it easy for material to be removed from the work piece and the edges are nice and consistent, so I'm not concerned about having uneven cuts.
Productos recomendados
Mex $519.00
Mex $ 238 .00 Mex $238.00
Mex $2,458.23
Mex $ 1,130 .00 Mex $1,130.00
Mex $386.49
Mex $ 208 .00 Mex $208.00
Mex $3,069.51
Mex $ 1,504 .00 Mex $1,504.00