Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Mxeol - Bisagras para puerta de barco de acero inoxidable, bisagras marinas de 3 x 1.5 pulgadas con tornillos, paquete de 4

Envío gratis en pedidos superiores a Mex $600.00

Mex $377.00

Mex $ 180 .00 Mex $180.00

En stock

1.Nombredelestilo:Moderno


Acerca de este artículo

  • Bisagra de puerta de barco con bisagras inoxidables de grado marino resistente a la corrosión, AISI: acero inoxidable 316. Cada paquete incluye las bisagras de puerta con tornillos básicos de acero inoxidable y fácil de instalar, todo de acero inoxidable con tornillos y se ajusta perfectamente.
  • El tamaño de la bisagra es de 3 pulgadas de longitud total x 1.5 pulgadas de ancho. La distancia es de 19,49 mm de centro a centro en dos agujeros cada hoja de esta bisagra de puerta. La distancia es de 26,5 mm entre los dos agujeros más cercanos de dos hojas cuando la bisagra se abre a plana. El grosor de una hoja es de 4,5 mm
  • Bisagras de acero inoxidable resistentes para escotilla empotrada de clóset de barco. Bisagras marinas de acero inoxidable para barco, caravanas, etc
  • Bisagras de puerta marina, herrajes para escotilla de barco, 2 paquetes y también 4 paquetes para más chioces.
  • Bisagra de puerta de barco hecha de acero inoxidable 316 grado marino 100% resistente a la corrosión.


Bisagras de puerta hechas de acero inoxidable AISI 316 para puerta de barco hechas de acero inoxidable 316, grado marino, 100% resistente a la corrosión. Cada paquete incluye las bisagras de puerta con tornillos básicos de acero inoxidable. El tamaño de la bisagra es de 3 pulgadas de longitud total x 1.5 pulgadas de ancho. La distancia es de 19.49 mm de centro a centro entre dos agujeros cada hoja de esta bisagra de la bisagra de la La distancia es de 26,5 mm entre los dos agujeros más cercanos de dos hojas cuando la bisagra se abre para aplanar el grosor de una hoja es de 4,5 mm


Jeff Moede
Comentado en los Estados Unidos el 29 de agosto de 2024
These are heavier duty than I needed, but work great. When mounting them in pairs, they must be even and parallel to avoid binding. I 3d printed a template to set them in so they could be mounted straight and are held in place. Works well, but was harder to create a CAD file for than I would have liked given the slightly weird shape.As common as 3d printing and other similar processes are now I hope they will consider including a QR code with their product in the future of a CAD file to simplify their use in production projects.
DoverNH
Comentado en los Estados Unidos el 23 de junio de 2024
Almost no magnetic properties, so that confirms they are stainless. Unlike the 304 stainless that is all over the place this is 316 stainless. 304 will still corrode in salt environments, these are 316 and should do a lot better. Hence the marine grade. Overall decent hinges. There is some lateral slop when opening and closing the hinges compared to say your household door hinges, but its minor and will actually probably be a benefit as dirt and salt get inside the mechanism it will still operate smoothly. I put that as a plus and not a negative. The hinges shiny side open/close all the way to zero degrees (flat against each other), but the non-shiny side (the side against the door/surface only closes to around 85 degrees. See my pictures. If you mount these flat against a wall, then the exterior of the door the door can open all the way and press against that wall (typical boat door). Similar if you mount them on a door pocketed into the frame and door jamb, the door will swing open and still be able to lie flat against the way, (that would be the hinge at 90 deg. With and extra 5 degrees to go. I'm probably confusing things a little, just know that in one direction the hinge does stop. Look at my pictures if you are concerned.
HoneyFitz
Comentado en los Estados Unidos el 21 de junio de 2024
Includes stainless steel screws for mountingThese are not soft close hinges.
Productos recomendados

Mex $369.00

Mex $ 173 .00 Mex $173.00

4.6
Elegir