No hay artículos en el carro
No hay artículos en el carro La pistola para estructuras y armazones Numax SFR2190 es Para la fabricación de armazones de madera, entablados de techos, tableros OSB y más. Está fabricado con los niveles más altos de calidad, el cuerpo de la pistola está construido de magnesio que la carga de un peso ligero 6 kg y duradera, es ideal en cualquier circunstancia de trabajo.
La Pistola Numax SFR2190 que está equipada con una junta tórica libre de aceite, el pistón de una sola pieza que ayuda y su durabilidad, utiliza las hojas de cabeza redondas con el mismo diámetro .113 "- .131" unidos en plástico, pude usar cualquier marca genérica de 21 grados, es importante que utilicen el grado correcto y el largo adecuado 2 "- 3-1 / 2".
Necesita compresor de 4 a 10 galones para su función. El mecanismo de protección de la pistola Numax se activa cuando el cargador solo quedan 5 clavos, -que quiere decir- la pistola se deja funcionar para tener solo 5 clavos, usted tendrá que recargar la pistola nuevamente para que siga funcionando, esto ayuda A la larga vida de la pistola.
Clayton
Comentado en Canadá el 3 de julio de 2024
I’ve put several dozen nails through this. So far no misfires. It’s easy to load. I’ve had no failures of any kind. Dial in your pressure and you are good to go.
iulian
Comentado en Canadá el 22 de febrero de 2024
Unpacked and tested. Works just fine on 2x4 lumber with both 3.5" and 2" round head nails. Plan to use it on a small project - shed so will get back in a couple of month. So far a very good buy for the price.
Jacqueline G.
Comentado en los Estados Unidos el 9 de enero de 2024
It May seem a Little Heavy , Which it is at 8 Lbs. But It's Very Powerful When Nailingf 3 1/2" Nails !It's Still Small Enough For Tighter Places With Only 2" or 2 3/8 " Nails. Mine Only Fired Blanks Once When The Nail Rack Was Not Perfect, Easy Fix...Sometimes it Will Double Nail When It's LOW On Air Pressure Otherwise It's Pretty Flawless... I've Nailed Over 2,000 Nails Already 2" To 3 1/2" Putting My Falling Down Garage Back Together With Very Little To NO Problems.... I Need a Smaller One For Hurricane Straps I Can't Reach Very Well Otherwise It's 5 Stars ! Excellent Price and Value For The Money...It's a Little Big ,Maybe a Little Heavy, BUT It Pounds Those 3 1/2" Nails Like Butter ! THE Adjustment For The LENGTH Is a Big Help For Lining Every thing Up Before Final Nailing... I Read a Complaint Where It Wouldn't Pound The Nail In All The Way And Had to Use a Hammer To Finish It ,WELL, READ THE DIRECTIONS, I Use The ADJUSTMENT Occasionally or It's just as Easy To Nail It Part Way By Hand As to Facilitate Lining Up The PLywood..
Trent Knowles
Comentado en Canadá el 25 de febrero de 2023
Came in time and works fine
Lenn
Comentado en México el 9 de diciembre de 2023
No se pudo cargar el contenido.
Marcela
Comentado en México el 1 de diciembre de 2023
Muy buena herramienta para evitar posibles lesiones de muñeca por martillar mucho, se traba a veces la salida del clavo pero creo que es por seguridad
Iván Montero
Comentado en México el 16 de junio de 2021
Exelente herramienta. Relación precio calidad.
Jesús U.
Comentado en México el 20 de octubre de 2020
Muy buen producto
Ethyl Plant
Comentado en los Estados Unidos el 20 de noviembre de 2019
I have been using my Dewalt framing nailers for many years, and blew a seal/o ring in one of them. I needed a replacement for a couple of days to finish up my porch, and saw this one for a really cheap price (the Deswalt guns were close to $400 each when I bought them). I figured with the cheap price, I would be lucky to get finished with my porch, but well worth it if I could.Well, it made it through my porch project with absolutely no issues whatsoever. No jamming, no partially driven nails, n o problems at all. I was truly impressed with it's performance - especially since it kept up with the other 2 Dewalt guns going at the same time! Now, 2 years later I am still using the nail gun as my "Go To" framing nailer, and just purchased a second one. My brother and I are remodeling part of my house, and we have put this gun, and my Dewalt guns through a lot over the last week. The Dewalt gun my brother was using blew out a seal/O Ring, so he started using this gun. He loved it so much that he is buying one for himself. He says it is a "back up" for his Dewalt framing nailer, but I have a strong feeling he will be using it as his "go to" framing gun like me!This framing nailer uses either 21 or 22 degree, plastic collated framing nails ranging from 2" to 3 1/2" in length. I have used MANY different brands of nails, usually going for the cheapest I could find. Lowe's, Home Depot, Fastenall, etc... all carry these nails, and even Amazon carries them. I personally use 2" - 2 1/2" ring shank nails the most, but have driven many, many 3 1/2" ring shanked nails also - with no issues. I have found that some brands of nails do seem to work a little smoother than others, but no big differences between brands that I have been able to tell.You just can't go wrong buying this framing nailer - ESPECIALLY for this price!!
Productos recomendados
Mex $702.42
Mex $ 344 .00 Mex $344.00
Mex $3,220.94
Mex $ 1,481 .00 Mex $1,481.00
Mex $9,462.00
Mex $ 1,881 .00 Mex $1,881.00
Mex $14,374.39
Mex $ 1,881 .00 Mex $1,881.00
Mex $2,783.46
Mex $ 1,308 .00 Mex $1,308.00