No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Durabilidad
El sensor de choque de doble ráfaga está hecho de metal de alta calidad, construido con artesanía de alta calidad, textura suave, no daña tus manos, combinación perfecta, duro y duradero, garantiza eficazmente la seguridad de un uso prolongado.
Seguridad:
El arnés de sensor de choque dual está 100% probado por vibración de acelerómetro para garantizar durabilidad y rendimiento en condiciones difíciles, resolviendo alarmas de visualización.
Instalación
Después de instalar los dos extremos roscados de los sensores en la parte superior del motor, luego conecta los dos enchufes del arnés de cableado a cada uno de los dos sensores, los gatos se conectan al arnés ECU del vehículo y se aseguran al motor por los clips metálicos de los sensores de ráfaga.
Terry Luscher
Comentado en los Estados Unidos el 28 de enero de 2025
This product went on a 05 Chevy Tahoe. however, the ecm is giving out a code of low power to these sensors. So back to the hunt.
Brian
Comentado en Canadá el 31 de julio de 2024
Product came quickly, good quality and fit. Reasonably price, works great, used on a 2004 Silverado 5.3
Lance
Comentado en los Estados Unidos el 27 de abril de 2023
I'd like to preface this with the fact the harness worked (and is still working) like a charm. The knock sensors however are very cheap and poorly made.**On the plus side, the seller did refund me for the cost as I ended up having to take this to a mechanic to drill out one of the broken sensors.The installation seemed overwhelming, but there are some great YouTube videos out there that will walk you through the entire process. The torque on these sensors is really low, only about 15 ft lbs.The issue for me is that even after replacing them, the car threw errors for both. When I tried removing them, the nut portion spun freely from the housing, so only the top was spinning and they weren't backing our. I used a chisel to lightly tap around the top so the nut would catch the rest of the housing. This worked well for the front sensor. When I did this to the rear sensor, the top half of the sensor broke off leaving only the bolt in the engine block. I tried backing it out with some extractors, but that broke. Three days and $750 later, my mechanic removed it and replaced them with OEM sensors (at $122/ea.)TL;DR, buy ACDelco sensors from an auto parts seller and save yourself a few hundred dollars and several hours of four letter words. What a royal pain.
ABDULRAHEEM ALGHAMDI
Comentado en Arabia Saudita el 17 de noviembre de 2022
لقد تم طلب القطع وتم تركيبها ولكن للأسف لمبة الماكينة مازالت تعمل وعند محاولة فك الحساس كان يدور في مكانه تكلفت كثيرا من اجل هذا .. لا انصح بشرائه
Rone
Installed no problems yet , seems to work and fit as advertised , fair pricing
Productos recomendados
Mex $818.30
Mex $ 368 .00 Mex $368.00
Mex $2,244.54
Mex $ 1,099 .00 Mex $1,099.00
Mex $689.00
Mex $ 358 .00 Mex $358.00
Mex $1,443.89
Mex $ 606 .00 Mex $606.00
Mex $340.00
Mex $ 180 .00 Mex $180.00