No hay artículos en el carro
No hay artículos en el carro
Especificaciones:
Artesanía: tratamiento de superficie anodizada.
Material: aleación de aluminio.
Compatible con: tipo 30, tipo 45, tipo 19, 20 tipos de inglete T-Track, 74 tipo T-track, 50/66 tipo combo T-track, 3/4" x 3/8" ranuras de inglete estándar
Alcance ajustable: 55-175 mm.
Dimensiones del deslizador: 1.2 x 0.9 x 0.3 pulgadas.
Peso de la plantilla de rasgado fino: 1 libra
El paquete incluye:
1 plantilla de rasgadura extendida.
2 deslizadores.
2 tornillos.
Customer
Comentado en los Estados Unidos el 3 de febrero de 2025
Makes cutting thin strips a breeze. Love this thing
Willy
Comentado en los Estados Unidos el 22 de febrero de 2025
Works very well. No iset up instructions
Gary
Comentado en los Estados Unidos el 10 de enero de 2025
I don't use it everyday and had physically attach it to my table. However when you need to make those repetitive cuts you will be thankful. It is solid and durable a cabinet makers dream. For the DIY people it will pay for itself in saving lumber.
Andrew Montgomery
Comentado en los Estados Unidos el 24 de septiembre de 2024
First: as an old-school machinist, I have to say that the build quality of this thing is excellent. Bearing seems robust, and fitment tolerances are RIGHT & TIGHT, although movement of the parts remains smooth. As far as use: this thing is pretty much essential if you're cutting slats or thin strips for things like dovetail box bottoms on a band saw. I was able to take a 7/16th piece of scrap doug fir and cut it down to three 1/10th in. (2.4mm) slats effortlessly and safely. For the price, I'm beyond satisfied...
Ryan Talley
Comentado en los Estados Unidos el 24 de marzo de 2023
Bought this for my DeWalt jobsite table saw to make some rips and help keep boards pushed to to the fence while cutting. NOTE: this does not fit the channel on the DeWalt jobsite table saw deck. These come with the T-Slot adapters, so you will either need to order some square connectors compatible with this jig or just modify your existing push guide rail that comes with the saw. I just mounted this jig to the original push guide railing that came with the saw (the push guide that sits in the channel and has the angles on it. If you want to do the same thing I did than you will need to get and tap it with a M6-1.00 tap. Worked perfectly after that was done.I Was having issues with wood wanting walk away from the fence while pushing the wood through. Sometimes when I go to adjust my hand position to grab the wood further back after running out of room to keep pushing it. It. It would sometimes come off of the fence just enough to screw up the rip cut. Well this jig helped me eliminate that problem by keeping the wood pushed tight to the fence while making the long rip cuts I needed. It also produces clean and even rips all the way through the whole cut. Made a bunch of 1/8" shims and they are true all the way through from start to finish.Also great for making long miter/beveled rip cuts aswell. But only if you have a square edge to start with. If you try to cut a miter or bevel on a piece that already has a miter or bevel, forget it. It doesn't work well on pieces that already have a miter cut on it. Just start with a clean square edge and your good. All in all I'm very happy with this jig. As it does more than job.
Productos recomendados
Mex $261.56
Mex $ 149 .00 Mex $149.00
Mex $954.71
Mex $ 467 .00 Mex $467.00