No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Taryn Wollert
Comentado en los Estados Unidos el 19 de enero de 2025
Was exactly what I was looking for. Fit perfectly into my old key fob! I did have to use some glue to keep it in place but the old button were so worn out that this really helped me be able to see and use my buttons again. Made my key look brand new!
Ken C.
Comentado en los Estados Unidos el 3 de julio de 2024
I am very pleased with the results of replacing the rubber pad on the key fob of my 20216 Hyundai Sonata. It was relatively simple to scrape out the old torn rubber using the provided tool, and then insert the new rubber. I watched a couple of YouTube videos before I began. Unlike one of the videos showed, no glue is needed in this process.One extra thing I found necessary was using a utility knife to cut off a few tiny bits of rubber on the underside of the insert. They were left over from the manufacturing process and interfered with the new rubber fitting snuggly onto the frame.After an investment of approximately 15 minutes and less than 10 dollars, my key fob looks and works like new!
Customer
Comentado en los Estados Unidos el 4 de febrero de 2024
The hardware fit the truck fine. But there were no instructions included. A few minutes on YouTube and I found what looked exactly like this product (Cali raised LED mount); used their instructions. You are going to need a T55 socket and be comfortable with drilling 3/8 holes in the metal sidewall.The install went pretty good, the frames fit fine but one of the 8 bolts in the kit was an odd size ( too short, didn't thread on the supplied lock nut). Going to have to hit the local hardware store for the bolt to finish the install because the truck is not drivable ( the tail lights are removed and re-installed during the kit install, and I can't put the one tail light back in until I get that correct last bolt)
Customer
Comentado en los Estados Unidos el 4 de febrero de 2024
The hardware fit the truck fine. But there were no instructions included. A few minutes on YouTube and I found what looked exactly like this product (Cali raised LED mount); used their instructions. You are going to need a T55 socket and be comfortable with drilling 3/8 holes in the metal sidewall.The install went pretty good, the frames fit fine but one of the 8 bolts in the kit was an odd size ( too short, didn't thread on the supplied lock nut). Going to have to hit the local hardware store for the bolt to finish the install because the truck is not drivable ( the tail lights are removed and re-installed during the kit install, and I can't put the one tail light back in until I get that correct last bolt)
Customer
Comentado en los Estados Unidos el 4 de febrero de 2024
The hardware fit the truck fine. But there were no instructions included. A few minutes on YouTube and I found what looked exactly like this product (Cali raised LED mount); used their instructions. You are going to need a T55 socket and be comfortable with drilling 3/8 holes in the metal sidewall.The install went pretty good, the frames fit fine but one of the 8 bolts in the kit was an odd size ( too short, didn't thread on the supplied lock nut). Going to have to hit the local hardware store for the bolt to finish the install because the truck is not drivable ( the tail lights are removed and re-installed during the kit install, and I can't put the one tail light back in until I get that correct last bolt)
Customer
Comentado en los Estados Unidos el 4 de febrero de 2024
The hardware fit the truck fine. But there were no instructions included. A few minutes on YouTube and I found what looked exactly like this product (Cali raised LED mount); used their instructions. You are going to need a T55 socket and be comfortable with drilling 3/8 holes in the metal sidewall.The install went pretty good, the frames fit fine but one of the 8 bolts in the kit was an odd size ( too short, didn't thread on the supplied lock nut). Going to have to hit the local hardware store for the bolt to finish the install because the truck is not drivable ( the tail lights are removed and re-installed during the kit install, and I can't put the one tail light back in until I get that correct last bolt)
Customer
Comentado en los Estados Unidos el 4 de febrero de 2024
The hardware fit the truck fine. But there were no instructions included. A few minutes on YouTube and I found what looked exactly like this product (Cali raised LED mount); used their instructions. You are going to need a T55 socket and be comfortable with drilling 3/8 holes in the metal sidewall.The install went pretty good, the frames fit fine but one of the 8 bolts in the kit was an odd size ( too short, didn't thread on the supplied lock nut). Going to have to hit the local hardware store for the bolt to finish the install because the truck is not drivable ( the tail lights are removed and re-installed during the kit install, and I can't put the one tail light back in until I get that correct last bolt)
Customer
Comentado en los Estados Unidos el 4 de febrero de 2024
The hardware fit the truck fine. But there were no instructions included. A few minutes on YouTube and I found what looked exactly like this product (Cali raised LED mount); used their instructions. You are going to need a T55 socket and be comfortable with drilling 3/8 holes in the metal sidewall.The install went pretty good, the frames fit fine but one of the 8 bolts in the kit was an odd size ( too short, didn't thread on the supplied lock nut). Going to have to hit the local hardware store for the bolt to finish the install because the truck is not drivable ( the tail lights are removed and re-installed during the kit install, and I can't put the one tail light back in until I get that correct last bolt)
Customer
Comentado en los Estados Unidos el 4 de febrero de 2024
The hardware fit the truck fine. But there were no instructions included. A few minutes on YouTube and I found what looked exactly like this product (Cali raised LED mount); used their instructions. You are going to need a T55 socket and be comfortable with drilling 3/8 holes in the metal sidewall.The install went pretty good, the frames fit fine but one of the 8 bolts in the kit was an odd size ( too short, didn't thread on the supplied lock nut). Going to have to hit the local hardware store for the bolt to finish the install because the truck is not drivable ( the tail lights are removed and re-installed during the kit install, and I can't put the one tail light back in until I get that correct last bolt)
Customer
Comentado en los Estados Unidos el 4 de febrero de 2024
The hardware fit the truck fine. But there were no instructions included. A few minutes on YouTube and I found what looked exactly like this product (Cali raised LED mount); used their instructions. You are going to need a T55 socket and be comfortable with drilling 3/8 holes in the metal sidewall.The install went pretty good, the frames fit fine but one of the 8 bolts in the kit was an odd size ( too short, didn't thread on the supplied lock nut). Going to have to hit the local hardware store for the bolt to finish the install because the truck is not drivable ( the tail lights are removed and re-installed during the kit install, and I can't put the one tail light back in until I get that correct last bolt)
Betoian
Comentado en los Estados Unidos el 13 de diciembre de 2024
It looks exactly the same until you actually try to install it, and notice there is a gap where the metal around holds it together. That's the part is missing.
Elbita
Comentado en los Estados Unidos el 23 de septiembre de 2024
No instructions, after try few time for 30 minutes each and NEVER FIT i give up. I will return it.
Joshua
Comentado en los Estados Unidos el 2 de septiembre de 2024
The rubber bit on my 2017 Sonata's keyfob has severe wear and tear from over the years, and at one point become unusable without having a stick to push the button.This came with the tools required to replace it (except for superglue), and fits quite nicely! It's not 100% identical because it misses some of the ridges, but it's far better than using the worn-down original keyfob. Would recommend it in a heartbeat. :)
CH
Comentado en los Estados Unidos el 7 de septiembre de 2023
Very solid. Hardware quality is good. Keep in mind you have to drill 8 holes in your bed to install. No reason to spend double on name brand these are just fine. Total install time less then 30 minutes
CH
Comentado en los Estados Unidos el 7 de septiembre de 2023
Very solid. Hardware quality is good. Keep in mind you have to drill 8 holes in your bed to install. No reason to spend double on name brand these are just fine. Total install time less then 30 minutes
CH
Comentado en los Estados Unidos el 7 de septiembre de 2023
Very solid. Hardware quality is good. Keep in mind you have to drill 8 holes in your bed to install. No reason to spend double on name brand these are just fine. Total install time less then 30 minutes
CH
Comentado en los Estados Unidos el 7 de septiembre de 2023
Very solid. Hardware quality is good. Keep in mind you have to drill 8 holes in your bed to install. No reason to spend double on name brand these are just fine. Total install time less then 30 minutes
CH
Comentado en los Estados Unidos el 7 de septiembre de 2023
Very solid. Hardware quality is good. Keep in mind you have to drill 8 holes in your bed to install. No reason to spend double on name brand these are just fine. Total install time less then 30 minutes
CH
Comentado en los Estados Unidos el 7 de septiembre de 2023
Very solid. Hardware quality is good. Keep in mind you have to drill 8 holes in your bed to install. No reason to spend double on name brand these are just fine. Total install time less then 30 minutes
CH
Comentado en los Estados Unidos el 7 de septiembre de 2023
Very solid. Hardware quality is good. Keep in mind you have to drill 8 holes in your bed to install. No reason to spend double on name brand these are just fine. Total install time less then 30 minutes
CH
Comentado en los Estados Unidos el 7 de septiembre de 2023
Very solid. Hardware quality is good. Keep in mind you have to drill 8 holes in your bed to install. No reason to spend double on name brand these are just fine. Total install time less then 30 minutes
Justice Middleton
Comentado en los Estados Unidos el 16 de marzo de 2022
These are basically identical to the Cali raised stiffeners. The bolts are heavy and good quality but they are stamped 10.9 grade but take standard tools instead of metric. Brackets are very stout. Definitely worth buying
Justice Middleton
Comentado en los Estados Unidos el 16 de marzo de 2022
These are basically identical to the Cali raised stiffeners. The bolts are heavy and good quality but they are stamped 10.9 grade but take standard tools instead of metric. Brackets are very stout. Definitely worth buying
Justice Middleton
Comentado en los Estados Unidos el 16 de marzo de 2022
These are basically identical to the Cali raised stiffeners. The bolts are heavy and good quality but they are stamped 10.9 grade but take standard tools instead of metric. Brackets are very stout. Definitely worth buying
Justice Middleton
Comentado en los Estados Unidos el 16 de marzo de 2022
These are basically identical to the Cali raised stiffeners. The bolts are heavy and good quality but they are stamped 10.9 grade but take standard tools instead of metric. Brackets are very stout. Definitely worth buying
Justice Middleton
Comentado en los Estados Unidos el 16 de marzo de 2022
These are basically identical to the Cali raised stiffeners. The bolts are heavy and good quality but they are stamped 10.9 grade but take standard tools instead of metric. Brackets are very stout. Definitely worth buying
Justice Middleton
Comentado en los Estados Unidos el 16 de marzo de 2022
These are basically identical to the Cali raised stiffeners. The bolts are heavy and good quality but they are stamped 10.9 grade but take standard tools instead of metric. Brackets are very stout. Definitely worth buying
Justice Middleton
Comentado en los Estados Unidos el 16 de marzo de 2022
These are basically identical to the Cali raised stiffeners. The bolts are heavy and good quality but they are stamped 10.9 grade but take standard tools instead of metric. Brackets are very stout. Definitely worth buying
Justice Middleton
Comentado en los Estados Unidos el 16 de marzo de 2022
These are basically identical to the Cali raised stiffeners. The bolts are heavy and good quality but they are stamped 10.9 grade but take standard tools instead of metric. Brackets are very stout. Definitely worth buying
Productos recomendados
Mex $4,890.00
Mex $ 1,881 .00 Mex $1,881.00
Mex $2,651.74
Mex $ 1,299 .00 Mex $1,299.00
Mex $6,848.01
Mex $ 1,881 .00 Mex $1,881.00
Mex $2,553.55
Mex $ 1,200 .00 Mex $1,200.00
Mex $10,423.23
Mex $ 1,881 .00 Mex $1,881.00
Mex $512.71
Mex $ 276 .00 Mex $276.00