EJ
Comentado en los Estados Unidos el 12 de abril de 2025
This is a well made product.
Matt N6CUQ
Comentado en los Estados Unidos el 24 de abril de 2025
Purchased to lengthen the pendulum on a morse code semiautomatic key. It enabled a work around to slow down the transmission speed. It worked out well.
Wayne Double-Yew jr.
Comentado en los Estados Unidos el 12 de mayo de 2024
This stainless tubing is exactly what I needed and wanted. I'm using is as the inlet guide tube for a direct drive print head on a 3D Printer.I have run a couple of sample pieces of filament through it to test and the fit is perfect.Probably never use it all but I was looking for an alternative to soft and prone to melt PTFE and this is exactly what I was looking for.
Roberto Castro Hernández
Comentado en México el 6 de marzo de 2024
El producto llegó rapido, pero estrellado, roto de la punta, es mejor y mas economico comprar estos articulos en fisico.
Schalk
Comentado en los Estados Unidos el 6 de febrero de 2024
This is some of the smallest tubes that I used for building my lights on a boat. One just need the correct size electrical wires to thread through them, which I ordered separately.
Husband
Comentado en los Estados Unidos el 22 de febrero de 2024
I needed a bit of metal tube that was VERY specific in size and I am pleasantly surprised that this is spot on.
Eduardo
Comentado en México el 4 de diciembre de 2024
El producto ya lo he usado y es bueno, lamentablemente yo lo compre para tenerlo de repuesto y hoy después de casi un año decidí usarlo por el frio y lamentablemente me llegó estrellado de la parte baja del tubo, recomendación no se confíen y revisen el producto 😭
Arturo Mendez Garcia
Comentado en México el 11 de diciembre de 2020
Se lo puse a mi tortuga
Cliente de
Comentado en México el 6 de noviembre de 2020
Es un calentador de agua demasiado bueno, el reglador de temperatura funciona muy bien y es posible regular la temperatura de acuarios desde 30 hasta 70 litros que es donde lo he puesto. Se mantiene estable todo el tiempo
Sergio zuñiga
Comentado en México el 6 de enero de 2020
Excelente termostato! Es grueso! Es de buena calidad y la forma en la que ajustas la temperatura es ideal! Me encanto! Y lo recomiendo!
Cesar Ortega Ortega
Comentado en México el 20 de enero de 2020
Hay recomendaciones que seguir del producto antes de usarlo referente al tiempo que hay que esperar antes de conectarlo, la temperatura la mantiene adecuada ...
J.Z
Comentado en México el 15 de marzo de 2019
Tengo un acuario con tortugas grandes, al lanzarse al agua han roto varios calentadores. Compré este como último recurso al ver que tenía acabados para combate continuo, no me equivoqué me sorprendió mucho la calidad y grosor del vidrio , incluso resiste el cambio de temperatura de frío a caliente (moderado) del agua con el calentador desconectado. o recomiendo ampliamente.
Alberto Tellez
Comentado en México el 2 de noviembre de 2019
Llevo usando este producto dos semanas y a diferencias de otros funciona muy bien y no se ha descompuesto, además que el cristal que lo recubre es más grueso que el del resto de termostatos que venden en los acuarios, vale la pena el precio
Tori
Comentado en Canadá el 15 de marzo de 2017
I don't have to monitor the tank anymore. Just set the temp and leave it be
Martin
Comentado en Canadá el 3 de abril de 2017
Excellent produit. Livraison tel que prévue
Moi
Comentado en los Estados Unidos el 22 de abril de 2016
This is a great fish tank heater. I first used it in my 3.5 betta tank because my first heater wasn't good at keeping a consistent temperature. With the first heater (at first I had no idea that bettas needed heated water so I picked up a cheap disk heater at Petco) I noticed my betta was lethargic, her color was dull, and she had horizontal stress marks on her side. I did some research and decided to get a heater that I had better control over. I'm so glad that I got this one. Now she is zooming around and her color has gone from a soft dull blue to a very vibrant almost purple color.It keeps my tank between 72-80 degrees, doesn't over heat it and I can decide how warm the water is. My old heater would only heat the tank to about 6 degrees F above room temp which isn't always great for a betta. It was also hard to tell if it was actually working. It never got the 3.5 gallon over 65 degrees which wasn't even more than room temp and not warm enough for a betta. If you have a small tank and are thinking about one of those heaters, don't do it. Although this is a bit more money it is worth it.It's easy to tell when the heater is working because you can see the orange light come on. It's also easy to see what temperature you have selected on the front of the heater. It works by using a dial and when you turn it, a red line goes up to the selected temperature. I have since upgraded to a 10 gallon tank and this heater works well for it too. I keep the heater at a lower temperature because the tank light also heats up the water.
Lmueller112
Comentado en los Estados Unidos el 11 de octubre de 2013
The quarts heater is great... I did run into one issue.. Just that when the water gets too low (even just a hair) a brown ring shows up around the bottom of the heater. It still works great and keeps temperature at the correct setting, but just has a minor flaw. I think the manufacturer should fix this problem and they would be golden...I only allowed it to get low twice because I forget to watch the water level sometimes... The tank seems to evaporate water pretty quickly.. But works okay for my baby painted turtle. He likes to use it to hold onto in the current of the filtration system :)
Joshrocker
Comentado en los Estados Unidos el 27 de abril de 2013
I have this in a 6.6 gallon Fluval Chi aquarium at my office. It's not too large and works well. I have the 100 watt version of this exact heater in my 20 gallon at home and loved it so I promptly ordered this one for my office tank. It works well and maintains the temperature perfectly. You'll have to watch this one however if you're putting it in a small aquarium because when I set the heat for 80 degrees the temp in the tank was no where near accurate. It's normal for heaters to differ a couple of degrees but this smaller heater was a little extreme. I have it set for 75 degrees on the heater but my tank maintains a consistent 80 degrees (the desired temp for my betta). It's rated for tanks up to 15 gallons, so maybe it's a little on the strong side for my smaller 6.6? I'm still giving it 5 stars however because once I found my desired temp it hasn't moved and has stayed very consistent. I would be a little extra vigilant if you're putting this in a smaller tank until you've found your desired temp.