No hay artículos en el carro
No hay artículos en el carroMás información del producto
Firearms Accurizing Torque Wrench
By: Wheeler Fine Gunsmithing Supplies
Wheeler's FAT Wrench brings perfect consistency to every screw on your rifle! This amazing handheld torque wrench lets you apply repeatable, accurate torque settings to scope rings, guard screws and other screws, which aids in accuracy and decreases the opportunity for problems in the field.
- Leupold/Buehler windage bit
- #10 flat blade bit
- #11 flat blade bit
- #32 flat blade bit
- 3/32" Allen bit
- 7/64" Allen bit
- 5/32" Allen bit
- T15 Torx bit
- T20 Torx bit
- Square drive adapter bit
Firearms Accurizing Torque Wrench
By: Wheeler Gunsmithing Product
The Wheeler Engineering F.A.T. Wrench is a hand driven, click/clutch system torque wrench that is very useful in apply the necessary torque to most firearms and firearm accessory fasteners. The F.A.T. Wrench features an ergonomic handle, a standard 1/4" hex drive tip, and can be used to apply torque from 10 to 65 in-lbs at 5 in-lbs increments. Common uses include; but are not limited to; instillation of scope rings and base screws, action screws and trigger guard screws. With proper care and use, the F.A.T. Wrench will provide you with a lifetime of reliable service. Package includes 9 bits and a square drive adapter.
-The F.A.T. Wrench is used like a screwdriver; it is not a ratcheting device.
-Leaving the F.A.T. Wrench adjusted at a high torque setting for extended periods of time may damage the internal mechanisms, resulting in inaccurate torque adjustments. ALWAYS ADJUST THE F.A.T. WRENCH TO THE LOWEST TORQUE SETTINGS AFTER EACH USE.
-Adjusting the F.A.T. Wrench beyond the torque wrench setting of 65 in-lbs may damage the internal mechanisms, resulting in inaccurate torque adjustments.
-The F.A.T. Wrench is compatible with all the bits contained in the Wheeler Engineering 89 piece Screwdriver Set.
-The F.A.T. Wrench is designed for +/- 2 in-lbs accuracy up to 40 in-lbs, +/- 5% over 40 in-lbs.
-The F.A.T. Wrench can be used to apply torque to any fastener; it is not limited to firearms and firearm accessories.
-Always protect the area surrounding screw heads with masking tape to prevent marring of metal and wood finished - just in case a bit slips out of the screw head while tightening.
-Small, inexpensive screws can be damaged with high torque settings. Be sure to comply with recommended settings.
-Small bits can be damaged with high torque settings. Replacement bits are available.
- The FAT Wrench is a perfect compliment to the Deluxe Gunsmithing Screwdriver Sets. Together, they can ensure accurate tightening of most every screw on any gun in your collection.
- Torque adjustments range from 10 inch pounds to 65 inch pounds
- Accuracy plus/minus 2 inch pounds
- 1/4" drive
- Plastic Case Included
What do I need a Tourque Wrench?
Adjusting screws on gun actions, scope bases ans scopre rings can not only prevent damage to your gun but can greatly increase accuracy.
What torque should I adjust my fasteners to?
Always refer to manufacturesr specs but we recommend:
Base Screws 30 inch-lbs
Ring Screws (aluminum) 10 -15 inch-lbs
Ring Screws (Steel) 15-20 inch-lbs
Windage Screws 30-40 inch-lbs
Guard Screws
(with bedding pillars) 65 inch-lbs
(no bedding pillars) 40 inch-lbs
*note: middle guard screw should not be torqued
Will bits from my Wheeler Engineering Screwdriver Set fit?
Yes. The bits included in the Wheeler 89pc set and 72pc set are designed to work perfectly with the FAT Wrench.
Storage Tip for FAT Wrench.
Never leave the Fat Wrench adjusted to high torque settings for extended periods of time. After each use adjust the torque to the lowest setting prior to storage. This will releive the tension from the internal mechanisms and ensure maximum accuracy over time.
Customer
Comentado en Canadá el 27 de febrero de 2025
Seems well built, comes with a nice case and worked perfectly when mounting my scope
Wachkatze
Comentado en los Estados Unidos el 17 de agosto de 2024
This tool is a must for those wishing to properly install a scope base and rings to a rifle, in addition to any task requiring inch-pound torque pressure to install a screw. First, the quality of this item is very good. It's well-made and simple to use. The instructions are clear, concise, and very easy to comprehend. I have a Brownells master gunsmith screwdriver set and this tool works with all the bits, making it incredibly versatile. The plastic case and ten accompanying bits are an added plus. Even though I have a good friend who is always more than happy to let me borrow his (and I have many times), I figured it's past time for me to buy my own. This is a very affordable, practical, and quality tool that you'll be pleased to own and use.
丸山 大樹
Comentado en Japón el 15 de abril de 2024
後部を引っ張って回すだけの簡単調整。必要なビットもすべつ入っていますから、スコープ、ダットサイトをご自身で取り付ける方には最適かと思います。
Grzegorz
Revisado en Polonia el 19 de julio de 2023
Przydatny w montażu optyki.
Marco
Comentado en Italia el 8 de septiembre de 2023
Strumento indispensabile per evitare di stringere troppo le ottiche (cannocchiali) sulle mount delle carabine o armi in genere.Prima di usarla non avevo idea di quanto poco andassero strette e andato ad occhio avrei rischiato di rovinare ottiche da migliaia di euro... impossibile pensare di affidarsi al caso, questo è uno strumento che serve se siete anche solo semplici appassionati dell'ambiente tiro.
Carlos delfín
Comentado en México el 21 de marzo de 2022
Se siente sólido y al parecer cumple y bueno es más caro que los que venden de china y al final también es chino pero bueno hoy en día casi todo lo que se vende aquí lo es
Antonio Carrillo
Comentado en México el 16 de marzo de 2022
Fácil de usar
Mariano Nephtalí Jiménez Lara
Comentado en México el 20 de febrero de 2022
Cumplió con mis expectativas, me ha sido muy útil por su precisión
Luis Gerardo
Comentado en México el 20 de febrero de 2021
Excelente herramienta, es lo que buscaba
Joaquin
Comentado en México el 16 de diciembre de 2021
Hasta ahora ha cumplido perfectamente su función. Se ve robusto y durable
julio c.
Comentado en México el 4 de enero de 2021
Excelente producto, muy práctico y fácil de usar, el ajuste del torque es muy sencillo, lo recomiendo ampliamente
Luis Humberto
Comentado en México el 13 de enero de 2021
Buen Producto, lo malo es que la escala es de 5 en 5. Ajustando en puntos medios se puede ajustar y listo.
rmartine
Comentado en México el 6 de septiembre de 2021
es la herramienta que vale la pena gastar en ella
Productos recomendados
Mex $2,578.47
Mex $ 1,134 .00 Mex $1,134.00
Mex $813.48
Mex $ 431 .00 Mex $431.00
Mex $4,779.19
Mex $ 1,881 .00 Mex $1,881.00
Mex $4,863.67
Mex $ 1,881 .00 Mex $1,881.00