No hay artículos en el carro
No hay artículos en el carroDescripción del producto
1 juego de termostato de aluminio para manguera de cruce, tubo de refrigerante, brida de salida de agua
Número de pieza de salida de agua del tubo de refrigerante: LR092992, LR090630, AJ813917, AJ813865, LR075991, C2Z28536, AJ811340
Especificaciones de la manguera cruzada superior del termostato:
Color: Tono plateado. Material: Aluminio. Tamaño de salida: Comprueba las imágenes. Incluye 1 tubo de agua superior con junta preinstalada, 1 tubo de agua inferior con junta preinstalada.
Ajuste de la brida de salida del refrigerante del motor:
Para Land Rover LR4 2014-2016, para Land Rover Range Rover Sport 2010-2022 para Land Rover Range Rover 2010-2021, para Land Rover Discovery 2017-2020 para Jaguar XJ 2010-2019, para Jaguar XF 2010-2020 para Jaguar F-Type 2014--4-2021, para Jaguar F-Pace 2017-2020, para Jaguar XE 2017-2019Solo para 3.0L V6 y 5.0 V8. Nota: Esto no es compatible con motor 5.0 de aspiración natural.
Tubo pulido de aluminio
En lugar de material plástico frágil, adoptamos con material de aluminio reforzado para prolongar la vida útil. Proporciona resistencia al desgaste, estabilidad térmica buena, no se rompe ni se deforma fácilmente.
Junta sellada preinstalada
Reemplaza el tubo de agua de plástico roto para evitar daños en el motor. Utiliza reemplazo para un mejor ajuste e instalación conveniente.
Dimeter de salida preciso
Antes de comprar, comprueba la marca, el modelo y el año requeridos. Puede haber un margen de error de 0,5 a 2 cm debido a la medición manual. Este producto no es OEM, solo accesorio
Scotty Brown
Comentado en los Estados Unidos el 22 de marzo de 2025
I had some fitment issues tabs would not nine up I had to drill the holes out so I could secure them.
Glen A. Just
Comentado en los Estados Unidos el 21 de febrero de 2025
Great way to avoid the dreaded plastic y-pipe split on Jaguar F-Types.
Mr. Thomas
Comentado en los Estados Unidos el 13 de junio de 2024
Horrible experience. I don’t order many auto parts from Amazon or website and this is the reason why.Proactively order all parts needed to complete this project in advance. I took apart the car and had everything ready for install when part arrived.The delivery was late to start things off. I quickly check both pipes for clogs and cleaned prior to installing.I installed the first crossover pipe (y shaped), after greasing the o-ring perfect fit with a little pressure. I then reinstalled the intake manifold / supercharger and carburetor.So far so good. Now it’s time to install the second coolant pipe from the order to the first pipe included in this order. Guess what!!!!!!! It didn’t fit! Too big!!Worst experience ever. I research and read reviews. I checked everything but didn’t think to check to make sure the 2 pipes in the box fit (I expected that piece to be good with the parts coming from the company as a set).Now I have to return this crap, order and wait for another. Worst part, I have to take the supercharger and intake off again to reinstall the new parts. Lost hours and hours because it’s this. I had to order a rental car for my trip because of this issue.I’ll let you all know how the company responds.I ordered this part June 2024.
Andrew Black
Comentado en los Estados Unidos el 12 de mayo de 2024
Really great. I had the leak most fpace owners have. Pulled the supercharger and replaced the Y coolant pipe and the crossover pipe. Jag wanted 3800$ for it. And to put plastic back in. I did a whole refit and upgraded to all metal parts. Make sure you line everything up. It all fits. Grease the orings too. 10/10 would recommend.
Sam H.
Comentado en los Estados Unidos el 9 de agosto de 2023
Great upgrade to the oem part.
Productos recomendados
Mex $343.96
Mex $ 182 .00 Mex $182.00
Mex $1,247.54
Mex $ 523 .00 Mex $523.00
Mex $501.41
Mex $ 270 .00 Mex $270.00
Mex $607.45
Mex $ 315 .00 Mex $315.00
Mex $419.26
Mex $ 201 .00 Mex $201.00
Mex $543.98
Mex $ 244 .00 Mex $244.00